- Choosing for an R-32 product, reduces the environmental impact with 68% compared to R-410A and leads directly to lower energy consumption thanks to its high energy efficiency
- Whisper quiet in operation: the operating of the unit can hardly be heard. The sound pressure level goes down to 19dBA!
- Ideal for installation in bedrooms (smaller capacity range) and larger or irregularly shaped living areas (larger capacity range)
- 2-area motion detection sensor: air flow is sent to a zone other than where the person is located at that moment; if no people are detected, the unit will automatically switch over to the energy-efficient setting. (larger capacity area)
- Online controller: control your indoor from any location with an app, via your local network or internet
- Discreet, modern design. Its smooth curve blends beautifully with the wall resulting in an unobtrusive presence that matches all interior décors.
- High quality matt crystal white finish
- New remote control design, also in high quality matt white finish to give a perfect match with the indoor unit
- Energy saving during standby mode: reduces current consumption by about 80% when operating In standby. If no people are detected for more than 20 minutes, the system will automatically switch to the current-saving mode.
2 area motion detection sensor
Air flow is sent to a zone other than where the person is located at that moment. If no people are detected, the unit will automatically switch over to the energy efficient setting.
Energy saving during standby mode
Current consumption is reduced by about 80% when operating on standby.
Daikin indoor units are whisper quiet. Also the outdoor units are guaranteed not to disturb the quiet of the neighbourhood.
Online controller via app
Control your indoor unit from any location via app
Decreases power consumption so that other appliances that need large power consumption can be used. This function is also energy saving.
Night set mode
Saves energy, by preventing overcooling or overheating during night time.
The unit can be used as fan, blowing air without heating or cooling.
Guarantees draught free operation by preventing that warm or cold air is directly blown on to the body.
Can be selected for rapid heating or cooling; after the powerful mode is turned off, the unit returns to the preset mode.
Auto cooling-heating changeover
Automatically selects heating or cooling mode to achieve the set temperature.
Indoor unit silent operation
"Silent" button on the remote control lowers the operation sound of the indoor unit by 3dB(A)
3-D air flow
Combines vertical and horizontal auto-swing to circulate a stream of warm or cool air right to the corners of even large spaces.
Vertical auto swing
Possibility to select automatic vertical moving of the air discharge flaps for efficient air and temperature distribution throughout the room.
Horizontal auto swing
Possibility to select automatic horizontal moving of the air discharge louvre, for uniform air flow and temperature distribution.
Auto fan speed
Automatically selects the necessary fan speed to reach or maintain the set temperature.
Allows humidity levels to be reduced without variations in room temperature.
Titanium apatite deodorising filter
Captures airborne dust particles and harmful organic chemical substances such as bacteria, viruses and allergens and deodorizes the odours of e.g. tobacco and pets.
Can be set to start heating or cooling anytime on a daily or weekly basis.
24 hour timer
Can be set to start operation anytime during a 24 hour period
Infrared remote control
Starts, stops and regulates the air conditioner from a distance.
Wired remote control
Starts, stops and regulates the air conditioner.
Starts, stops and regulates several air conditioners from one central point.
The unit restarts automatically at the original settings after power failure.
Simplifies maintenance by indicating system faults or operating anomalies.