FTY-HL / RY-HL

Product Features

  • First R-32 air-to-air heat pump in the European market
  • 100% fresh air intake possible
  • 2-stage compression module for VRV III heat pump optimised for heating
  • 5 different discharge angles between 0 and 60°can be programmed via the remote control
  • A booster unit allows to connect freezer showcases or cold rooms to ZEAS and Conveni-Pack outdoor units
  • A combined stainless steel domestic hot water tank of 180 or 230L and heat pump for easy installation
  • Accessory for filling and draining the tank
  • Accurate humidity and temperature control to guarantee the quality of products (e.g. wines)
  • Advanced integration into BMS system of Sky Air, VRV, VAM and VKM through Modbus, Voltage (0-10V) or Resistance
  • Air to water connection to VRV for applications such as bathrooms, sinks, underfloor heating, radiators and air handling units
  • Air to water connection to VRV for applications such as underfloor, air handling units, low temperature radiators, …
  • Allows individual cool / heat switching of 1 group of indoor units
  • Allows output signal of compressor or fan operation
  • Anti cool air design: the power dual flaps flatten out during cooling operation to deliver cool air to the corners of a room. The flaps descend to blow warm air directly down to the floor to quickly warm up the whole room.
  • Assembly kit to mount EKHTS tank on indoor unit
  • Available as 20 and 25kW
  • Available static pressure up to 60Pa
  • Benefit from the high efficiency and fast response to changing loads of ERQ condensing units
  • Blends unobtrusively with any interior décor: only the suction and discharge grilles are visible
  • Blends unobtrusively with any interior décor: only the suction and discharge grills are visible
  • Can fit on either ceiling or lower wall; its low height enables the unit to fit beneath a window
  • Choosing for an R-32 product, reduces the environmental impact with 68% compared to R-410A and leads directly to lower energy consumption thanks to its high energy efficiency
  • Choosing for an R-32 product, reduces the environmental impact with 68% compared to R-410A, leads directly to lower energy consumption thanks to its high energy efficiency and has a 10% lower refrigerant charge
  • Class A efficiency in heating mode
  • Combination of air-to-water heat pump split system (outdoor and indoor) and gas condensing boiler
  • Combines air intake and gas exhaust in one tube
  • Communicates with the indoor unit when multiple set point control is used
  • Communication cable for BRC944 controller
  • Compact & lightweight single fan design makes the unit almost unnoticeable
  • Compact brine-to-water heat pump with integrated domestic hot water tank
  • Compact casing (575mm in width and depth) enables unit to fit flush into ceilings and match standard architectural modules, without cutting ceiling tiles
  • Compact design to allow easy indoor installation or retrofit operations
  • Compact dimensions, can easily be mounted in a ceiling void of only 240mm
  • Compact dimensions, can easily be mounted in a ceiling void of only 355mm
  • Compact dimensions, can easily be mounted in a narrow ceiling void (only 220mm ceiling space required, 195 with panel spacer, available as accessory)
  • Compact heating only monobloc for space heating with optional domestic hot water
  • Compact reversible monobloc for space heating & cooling with optional domestic hot water
  • Compact unit (230mm high & 652mm deep), can easily be mounted in narrow ceiling voids
  • Compressor module for VRV IV i-series
  • Condensing unit for floor standing or roof mounted installation and ceiling mounted evaporator
  • Connectable to ERQ heat pump
  • Connectable to VRV heat recovery and heat pump
  • Connectable to VRV heat recovery, heat pump and Conveni-pack
  • Connectable to options like domestic hot water tank, heat pump convector, room thermostat, back up heater kit, remote indoor sensor, electric meter, changeover to external heat source, etc.
  • Connectable to options like remote indoor sensor, electric meter, changeover to external heat source, etc
  • Control up to 16 groups (maximum 128 indoor units)
  • Control up to 64 groups (maximum 128 indoor units)
  • Control your Daikin system and track your energy consumption via smartphone, tablet or computer
  • High efficiency: - Energy labels up to A+ (cooling) / A (heating) - compressor offers substantial efficiency improvements
  • Tank designed for connection with drainback thermal solar system
  • Choosing for an R-32 product, reduces the environmental impact with 68% compared to R-410A, leads directly to lower energy consumption thanks to its high energy efficiency and has a lower refrigerant charge
  • Possibility to control multiple indoor units via app
  • The thermal store is designed to work with a gas/oil boiler
  • Very compact and easy to install
  • Replace existing systems with R-32 technology without needing to replace the piping
  • Combining with R-32 Bluevolution technology, reduces environmental impact with 68% compared to R-410A, leads directly to lower energy consumption thanks to its high energy efficiency and has up to lower 16% refrigerant charge
  • Connectable to all VRV indoor units, ventilation and control systems
  • Control your indoor from any location with an app, via your local network or internet
  • Cost effective and fast replacement as only the outdoor and indoor unit needs to be replaced, meaning almost no work has to be carried out inside the building
  • Covers all thermal needs of a building via a single point of contact: accurate temperature control, ventilation and air handling units
  • Covers all thermal needs of a building via a single point of contact: accurate temperature control, ventilation, hot water, air handling units and Biddle air curtains
  • Covers the valves of the heat pump module
  • Daikin Altherma hybrid heat pump combines air-to-water heat pump technology with gas condensing technology
  • Daikin Emura's most obvious asset is its looks. The sober but stylish appearance adds an additional dimension to Daikin's well-known brand values of superior comfort and quality
  • Designed specifically for small capacity refrigeration applications in small food stores (eg. in bakeries and butchers), cold rooms, bottle coolers and display cabinets
  • Discreet, stylish front panel blends easily with the wall, and matches all interior décors
  • Diverts condensate water from the outdoor unit
  • Domestic hot water is heated almost immediately
  • Drain-up pump with 850mm lift fitted as standard
  • Dual refrigerant circuit (4 scroll compressors) with single evaporator
  • ESEER up to 4.7
  • ESEER up to 5.01
  • Easy and convenient regulation of the indoor temperature, resulting in ideal comfort and energy efficiency
  • Easy installation: no need for wiring or to drill holes
  • Easy to install ‘plug and play’ concept plus single installation configuration; no additional piping is required since indoor and outdoor sides are pre-connected
  • Electric back-up of 9 kW for peak heating demands
  • Electric single phase back-up of 6 kW for peak heating demands
  • Electric three phase back-up of 6 kW for peak heating demands
  • Enameled domestic hot water tank
  • Energy efficient heating only system without back-up heater
  • Energy efficient units: full range A class energy labels
  • Energy saving ventilation using indoor heating, cooling and moisture recovery
  • Energy-saving gas condensing technology with efficiency levels of up to 109%
  • Environmental conscious solution: reduced CO2 emmisions thanks to the use of geothermal energy as a renewable energy source and typical lower refrigerant levels making it ideal to comply with EN378
  • Especially developed for light commercial applications (shops, restaurants, small offices) where multi systems are required
  • Even rooms with ceilings up to 3.5m can be heated up or cooled down very easily without capacity loss
  • Excellent part load efficiency
  • Extended operation range up to 50°C in cooling
  • First VRV system using CO2 (R-744) as a refrigerant
  • First system in the industry developed for heating operation in low ambient conditions, making it suitable for single source heating
  • Flat, stylish front panel blends easily within any interior décor and is easier to clean
  • Flexible design tailored to the customers' needs, optimizing the unit for the most cost effective selection
  • Flexible solar system for pressurised and drain-back solar applications
  • Floor standing indoor unit
  • Floor standing indoor unit up to 9kW
  • Floor-standing gas condensing boiler with integrated hot water or solar storage tank
  • Floor-standing oil condensing boiler
  • For Triple system
  • For Twin and Double Twin system
  • For high ambient temperatures up to 52°C
  • For high ambient temperatures up to 54°C
  • For residential and light commercial applications
  • For retail applications
  • For standard cooling & heating requirements
  • For wall or ceiling mounted installation: ideal solution for spaces with no false ceilings
  • Free cooling chiller for space cooling and industrial processes
  • Fully flat integration in standard architectural ceiling tiles, leaving only 8mm
  • Ground source heat pump technology uses stable geothermal energy, unaffected by the outside temperature
  • Guaranteed heating capacity at low ambient temperature, down to -25°C
  • Heat exchanger module for VRV IV i-series
  • Heating only high efficiency gas condensing boiler
  • High COP cassette ensures top performance, great savings in energy consumption and a comfortable environment for commercial applications
  • High aesthetic cabinet design
  • High ambient
  • High efficiency DC inverter scroll compressors
  • High efficiency gas condensing boiler
  • High efficiency gas condensing boiler for heating and hot water
  • High efficiency with leader-of-class ESEER
  • High efficiency: - Energy labels up to A++ (cooling) / A+ (heating) - compressor offers substantial efficiency improvements
  • High energy efficiency both at full and part load conditions
  • High energy efficient units: full range Eurovent Class A
  • High external static pressure up to 250Pa facilitates using flexible ducts of varying lengths
  • High external static pressure up to 270Pa facilitates extensive duct and grille network
  • High heating energy efficiency with SCOP up to A++
  • High quality matt crystal white finish
  • Higher efficiency thanks to free cooling application
  • Ideal for colder climates as the lack of glycol will allow for high efficiencies
  • Ideal for installation in offices, hotels and residential applications
  • Ideal for installation where extra high ceilings could lead to inefficient heating from ceiling mounted units
  • Ideal solution for busy retail and business environments and small shops
  • Ideal solution for commercial and busy environments
  • Ideal solution for commercial comfort cooling and/or heating applications
  • Ideal solution for commercial spaces with no or narrow false ceilings
  • Improved in-room air quality, by preventing dust and odours to accumulate on the filter
  • In combination with fully flat cassette
  • In combination with fully flat cassette standard panel
  • In combination with round flow cassette
  • Integrated control system for seamless connection between Split, Sky Air, VRV, chilers, AHU and BMS systems
  • Integrated indoor unit: pre-plumbed and pre-wired indoor unit for a simpler, hassle free and neater heating and hot water installation
  • Integrated solar unit with 300l tank, offering top comfort in heating and hot water
  • Integrated solar unit with 300l tank, offering top comfort in heating, hot water and cooling
  • Integrated solar unit with 500l tank, offering top comfort in heating and hot water
  • Integrated solar unit with 500l tank, offering top comfort in heating, hot water and cooling
  • Integrated solar unit, offering top comfort in heating and hot water
  • Integrated solar unit, offering top comfort in heating, hot water and cooling
  • Integrates high and low temperature refrigeration and air conditioning (including heating) into one system
  • Integration of Sky Air/VRV units in BMS systems
  • Integration of Split units in home automation
  • Intelligent hotel room controller
  • Interface for BMS system
  • Intuitive and user-friendly interface via touch screen control or Daikin Cloud Service
  • Intuitive menu screens enable, even novice users to operate and monitor the system like an expert
  • Inverter chiller
  • Inverter technology to ensure low sound values and leader-of-class ESEER
  • Invisible unit as the unit is concealed in the ceiling: only the suction and discharge grilles are visible
  • Large assembly kit, expansion vessel and valves
  • Low temperature applications from -40°C to -20°C saturated suction temperature
  • Lower equipment, installation and annual operating costs than two single compressor chillers
  • Medium assembly kit, expansion vessel and valves
  • Medium temperature applications from -20°C to 10°C saturated suction temperature
  • Modbus interface for monitoring and control of Sky Air, VRV, VAM and VKM
  • Modbus interface for monotoring and control of Daikin Altherma low temperature split
  • Modbus interface for monotoring and control of residential indoor units
  • Modern style decoration panel in white
  • Narrow ceilings voids are no longer a challenge, 50 & 60 class units can swiftly be integrated as they only are 245mm in height.
  • No friction loss, no oil contamination, no additional oil management systems and an increased equipment life thanks to the magnetic bearing technology
  • One model for all applications from -45°C to 10°C evaporating temperature
  • One of the most compact units on the market: 600mm x 600mm x 600mm
  • One refrigerant circuit with single screw compressor
  • Online controller: control your heating and domestic hot water system from any location with an app, via your local network or internet
  • Optimized energy efficiency both at full and part load conditions
  • Outdoor unit extracts heat from the outdoor air, even at -25°C
  • Outdoor unit module for VRV III heat pump optimised for heating to create systems from 10 to 20HP
  • Outdoor unit module for VRV III heat recovery replacement VRV to create systems from 280 up to 848
  • Outdoor unit module for VRV IV heat pump with continuous heating to create systems from 16 up to 54HP
  • Outdoor unit module for VRV IV heat recovery to create systems from 10 up to 13HP
  • Quick fixing system for wall mounted installation
  • Quick fixing system for wall or ceiling mounted installation
  • Rapid mounting on the roof of the cold room
  • Rapid mounting on the wall of the cold room by straddle-mounting, which is ideal for new installations or through-wall mounting, which is ideal for refurbishment projects
  • Reliable in operation
  • Remarkable blend of iconic design and engineering excellence with a silver coloured elegant finish
  • Single phase heating only monobloc
  • Space saving trunk design for flexible installation
  • The aluminium part of the front panel of the Nexura indoor unit has the capability of warming up, just like a traditional radiator, to add even more comfort on cold days
  • Three phase heating only monobloc
  • Top efficiency gas condensing boiler thanks to labyrinth fin heat exhanger for improved heat exchange
  • URURU humidification: maintains a comfortable humidity level without any separate water supply
  • Very compact unit and flexible in use: possible to install in nearly all room conditions (inside the house as well as outside) thanks to freeze protection for water piping
  • Wall mounted condensing unit and ceiling mounted evaporator
  • Whisper quiet in operation down to 20 dBA
  • Remarkable blend of iconic design and engineering excellence with an elegant finish in black
  • Remarkable blend of iconic design and engineering excellence with an elegant finish in brushed aluminium
  • Remarkable blend of iconic design and engineering excellence with an elegant finish in matt crystal white
  • Allows individual cool / heat switching for up to 4 groups of indoor units
  • Allows individual cool / heat switching for up to 6 groups of indoor units
  • Ceiling assembly leaves the space inside the cold room completely free
  • Compact & light to install
  • Covers all thermal needs of a building via a single point of contact: accurate temperature control, ventilation, air handling units and Biddle air cutains
  • Daikin outdoor units are equipped with an anti-corrosion treated heat exchanger (blue fin) which ensures greater resistance to the most severe weather conditions
  • Discretely concealed in the ceiling: only the suction and discharge grilles are visible
  • Discretely concealed in the wall: only the suction and discharge grilles are visible
  • Easy to service: all parts are accessible by only removing the front panel
  • Energy efficient units: COP up to 4.1
  • Especially designed to combine with Ururu multi outdoor unit (MXU)
  • Excellent air flow and air distribution
  • Extremely rapid mounting
  • Fuss-free installation : only water connections required
  • Highest seasonal efficiency thanks to our inverter heat pump technology
  • Inverter controlled swing compressor
  • Low running costs for both heating and hot water thanks to new dual heat exchanger
  • Lower maintenance costs and fewer system disruptions as dust can easily be removed with a vacuum cleaner
  • Maximum design flexibility because individual and multi boxes can be combined in one system
  • Maximum use of renewable energy: uses heat pump technology for heating and solar support for space heating and domestic hot water production
  • Metallic grey coloured finish of the outdoor unit
  • Outdoor units are fitted with a swing compressor, renowned for its low noise and high energy efficiency
  • Outdoor units for pair, twin, triple, double twin application
  • Perfect fit for new built as well as for low energy houses
  • Plastic thermal store with stainless steel corrugated pipe indirect coil
  • Plastic thermal store with stainless steel corrugated pipe indirect coil for combination with ROTEX HPSU
  • Possibility to control multiple Daikin Emura units via app
  • Powerful air purification increases indoor air quality with Daikin Streamer technology
  • Premium energy efficiency both at full and part load conditions
  • Prevents ice built-up at the bottom of the outdoor unit
  • Quiet in operation down to 23 dBA
  • Quiet operation: with 53 dBA, one of the most silent products in its kind
  • Rapid mounting on the wall of the cold room by through-wall mounting
  • Reduction in power consumption thanks to DC inverter fans
  • Save energy and reduce CO2 emissions with a solar system for domestic hot water production
  • Schedule timer: uses a timer to schedule heating and cooling setpoints throughout the day; up to 5 setpoints can be programmed per day; the selected setpoints will be automatically activated at the scheduled time
  • Seasonal classic series already comply with EU's 2014 Eco-Design requirements
  • Seasonal efficiency values up to A++ in cooling
  • Seasonal efficiency values up to A+++ in cooling and A++ in heating thanks to its up-to-date technology and built-in intelligence
  • Seasonal smart series already comply with EU's 2014 Eco-Design requirements
  • Set to connect propane gas
  • Single refrigerant circuit (2 scroll compressors) with single evaporator
  • Single stage centrifugal compressor
  • Single unit for installation outdoors (installation without refrigerant)
  • Small assembly kit, expansion vessel and valves
  • Solar collectors can produce up to 70% of the energy needed for hot water production - a major cost saving
  • Space-saving gas condensing boiler with integrated heat / solar storage
  • Split system consisting of indoor unit and outdoor unit
  • Split system, consisting of outdoor unit and indoor unit with integrated thermal store, with a maximum flow temperature of 55°C
  • Stylish, modern casing in silver
  • Stylish, modern casing in white
  • Super Multi Plus combines the power and easy installation of a VRV outdoor unit with the quiet operation of residential indoor units
  • Symbol driven end user interface for intuitive control
  • Tank designed for connection with pressurised thermal solar system
  • Tank designed for connection with thermal solar collectors
  • The pressureless solar thermal store is designed to work alone or in combination with a gas/oil boiler
  • The pressurised solar thermal store is designed to work alone or in combination with a gas/oil boiler
  • The round flow cassette provides a more comfortable environment and offers greater savings in energy consumption to shop, office and restaurant owners
  • The sequencing controller allows central control and monitoring of the exact heating demand of a complete heating system
  • Three phase reversible monobloc
  • To monitor your system remotely
  • Top efficiency in the market
  • Top efficiency in the market! Energy label up to A
  • Top efficiency in the market! Energy label up to A++
  • Top efficiency: - energy labels up to A++ in both cooling and heating - compressor that offers substantial efficiency improvements - control logic that optimises efficiency at the most frequently encountered operating conditions and that optimises the auxiliary modes (when the unit is not active) - heat exchangers that optimise the refrigerant flow at the most frequent operating conditions (temperature and load) - via improved nominal performances
  • Top efficiency: - Energy labels up to A++ in both cooling and heating - compressor offers substantial efficiency improvements
  • Top energy efficiency in Daikin heat recovery range, thanks to the redesigned 8HP modular unit and newly developed 12HP high COP modular unit
  • Top product in terms of energy efficiency and operation range
  • Totally oil-free operation resulting in reduced maintenance costs and increased reliability
  • Transfers solar heat to the domestic hot water tank
  • Two different temperature zones can be automatically regulated by the same indoor unit
  • URURU humidification: maintains a comfortable humidity level from incorporated 4 liter water tank
  • Unified range for standard and geothermal series simplifies stock. Geothermal series reduce CO2 emmisions thanks to the use of geothermal energy as a renewable energy source
  • Unique combination of humidification, dehumidification, ventilation, air purification and heating & cooling in 1 system
  • Unit can be installed as free standing model by use of optional back plate
  • Up to 147 Pa external static pressure (ESP) facilitates using flexible ducts of variying lengths: ideal for use in large areas
  • Up to 250Pa external static pressure allows extensive ductwork runs and flexible application: ideal for use in large areas
  • Up to 5 indoor units can be connected to 1 multi outdoor unit; all indoor units are individually controllable and do not need to be installed in the same room or at the same time. They operate simultaneously within the same heating or cooling mode.
  • User friendly remote control with contemporary design
  • User-friendly interface allows easy front desk support
  • Valve and piping kit for installation of a hybrid heat pump
  • Valve kit for FWXV
  • Valve kit for ground source heat pump
  • Wall mounted indoor unit
  • Wall-mounted gas condensing boiler
  • Wide range of units offers maximum application potential and flexible control options
  • Wired remote controller especially developed for VAM units
  • 1-2 truly independent refrigerant circuits
  • 3 area intelligent eye: air flow is sent to a zone other than where the person is located at that moment. Detection is done in 3 directions: left, front and right. If no people are detected, the unit will automatically switch over to the energy-efficient
  • 60Hz units
  • A series of advantages thanks to the use of large-capacity scroll compressors: increased competitiveness, reduced weight, clearances around the unit
  • Accurate temperature measurement thanks to flexible placement of the sensor
  • Advanced compressor and fan design resulting in low operating sound levels
  • Advanced control of Sky Air, VRV, VAM/VKM and air curtains
  • Air flow from 500m³/h up to 144,000m³/h
  • All capacities available in 2 versions: standard version and version with OP10 option (no freeze up of water when not in operation thanks to the water piping heater tape)
  • Allows bringing in fresh air directly via the indoor unit
  • Allows full closure of one or 2 flaps
  • Allows output signal to auxiliary heater or humidifier
  • Auto Adaptive Lambda Gx combustion technology for all gas types
  • Available in 150, 200 and 300 liters
  • Available in 300 and 500 liters
  • Best seasonal efficiencies, providing the highest savings on running costs
  • By using heat recovery, optimised controls and state of the art compressor technology, Conveni-pack can reduce annual energy consumption up to 50% or more, compared to conventional systems
  • CO2 has a Global Warming Potential of 1 and an Ozone Depletion Potential of 0 making it potentially one of the most environmental friendly refrigerants used
  • Capacity 6.5 to 33kW, storage tank volume 300 litres
  • Capacity 6.5 to 33kW, storage tank volume 500 litres
  • Centrifugal fans with forward-curved blades for low sound levels
  • Choice between 8 air flow distribution patterns
  • Communication via Modbus RS485 protocol
  • Compact and lightweight for even the smallest of city centre locations
  • Compact design with brazed plate heat exchanger
  • Compact footprint through stacked heat exchanger lay-out
  • Connectable to all standard VRV indoor units, controls and ventilation
  • Control and monitor up to 64 indoor units/groups
  • Cooling range: 248-567kW
  • Covers all thermal needs of a building via a single point of contact: accurate temperature control, ventilation, air handling units, Biddle air curtains and hot water
  • Creates a high quality indoor environment by pre conditioning incoming fresh air
  • Cylinder capacity 300 litres
  • Cylinder capacity 500 litres
  • DX shell and tube evaporator – one pass refrigerant side for easy oil circulation and return
  • Depth of all units is 620mm, ideal for narrow spaces
  • Developed for regions with severe winter conditions
  • Duty rotation and back-up for infrastructure cooling
  • EC fan with air flow or pressure control, nominal air flow programmed at factory, and silent operation
  • Easy handling: thanks to its compact size, it can easily pass through the doorway
  • Easy to use: all main functions directly accessible
  • Efficiency gains of more than 70% can be realized, by virtue of technological developments in heat pump technology and the more efficient R-410A refrigerant
  • Energy saving: the air conditioning switches off automatically when a hotel guest leaves the room or opens a window
  • Excellent full and part load efficiency
  • Extended operation range down to -25°C in heating
  • Extended operation range: ambient temperatures from -10°C up to +46°C in cooling mode and down to -17°C in heating mode
  • Factory pre-charged refrigerant ensures clean and efficient operation
  • Flooded type heat exchangers
  • For chilled water production, to be combined with a remote condensing unit
  • For control of space heating, cooling and domestic hot water with among others reheat, scheduled and booster mode
  • For control of space heating, cooling and domestic hot water, including booster mode
  • For hot water and heating
  • For hot water, heating and cooling
  • For space heating and domestic hot water
  • Fresh air intake ensures higher comfort levels
  • Fresh water principle: receive domestic hot water on demand while eliminating the risk of contamination and sedimentation
  • Fully integrated solution with heat recovery for maximum efficiency with COPs of up to 8 !
  • Functions focus on basic customer needs: temperature, fan speed, ON/OFF
  • Functions focus on basic customer needs: temperature, mode, fan speed, ON/OFF
  • Group control (clone from master RTD)
  • Heat pump version available
  • Heat pump version with reversibility on refrigerant side available, ideal for geothermal applications
  • Heating and cooling wall mounted indoor unit of air-to-water heat pump
  • Heating only wall mounted indoor unit of air-to-water heat pump
  • High efficiency thanks to the energy reducing function of the cascade operation of units
  • High part load efficiency for low running cost
  • High seasonal efficiency
  • High-efficiency flat solar panels in 3 sizes
  • Horizontal auto swing moves the discharge flaps left and right for efficient air and temperature distribution throughout the room
  • Horizontal solar collector for domestic hot water production
  • Hydronic module for indoor installation eliminating the need for glycol
  • Ideal for installation in bedrooms (smaller capacity range) and larger or irregularly shaped living areas (larger capacity range)
  • Improved comfort thanks to 3-step air flow control
  • Improved energy efficiency: up to A+ energy labels
  • Inclusion of all hydraulic components means no third party components are required
  • Increased comfort in low outdoor temperatures thanks to the heated outdoor air
  • Integration through KNX interface allows monitoring and control of several devices, such as light, alarm and shutters, from one central controller
  • Inverter controlled outdoor unit
  • Inverter stepless single-screw compressor
  • Inverter stepless single-screw compressor with DC electrical motor
  • Large air flow: 420m³/h in turbo mode
  • Large operation range (ambient temperature down to -18°C and up to 46°C)
  • Large operation range (ambient temperature down to -18°C and up to 50°C)
  • Leaving water temperature range from 25 to 80°C without electric heater
  • Leaving water temperature range from 5°C to 45°C without electric heater
  • Limits the consumption or switches off the air conditioning whenever the total house consumption is too high
  • Long piping length for flexible installation
  • Low energy consumption
  • Lowest installation height in the market: 204mm for class 71
  • Main components can be removed or repaired without shutting down the unit as the chiller has two of everything (compressors, lubrication systems, control systems and starters)
  • Maximum efficiency thanks to the 2‐in‐1 heat exchanger in every combi boiler
  • Maximum external static pressure (ESP): 100Pa
  • Medium external static pressure up to 150Pa facilitates using flexible ducts of varying lengths
  • Monitor and control your building no matter where you are via the Daikin Cloud Service
  • Necessary to connect with EKRTR/EKRTW room thermostats
  • No need for an external heating or cooling source
  • No need for an external heating or cooling source when used in geothermal mode
  • Offers flexibility to the end user to combine different heat emitters e.g. under floor heating and radiators while optimising the efficiency
  • Online controller (optional): control your indoor from any location with an app, via your local network or internet and keep an overview on your energy consumption
  • Optimum air distribution
  • Optimum air flow conditions are created by either downward air discharge or frontal air discharge (via optional grille) or a combination of both
  • Optimum energy efficiency when connected to a Daikin Altherma low temperature system
  • Perfect solution for all cooling and freezing applications with variable load conditions and high energy efficiency requirements.In particular used in supermarkets, cold storage, blast coolers and freezers etc.
  • Power spectrum 12 to 34 kW
  • Power spectrum 4.5 to 40kW
  • Powerful cooling performance, even under extreme temperatures: - superior cooling capapcity at high ambient conditions - quick cooling: up to 1.5 faster than traditional non-inverter systems
  • Practically inaudible: the unit runs so quietly, you will almost forget it is there.
  • Pre-assembled 3-way/4-port on/off valves are available
  • Pump station connectable to unpressurised solar system
  • Quiet in operation down to 21 dBA
  • Quiet operation via enlarged fan wheels
  • Quiet operation: down to 25dBA sound pressure level
  • Reduced piping requirements, from 4 to 2 pipes, compared to a conventional system
  • Reduced running costs
  • Reliable and efficient scroll compressors with high EER values
  • Remarkable blend of iconic design and engineering excellence with an elegant finish in silver and anthracite
  • Remarkable blend of iconic design and engineering excellence with an elegant finish in white or a combination of silver and white
  • SARARA dehumidification: maintains a comfortable and fresh indoor environment by removing moisture from the air without lowering the temperature
  • Save energy and reduce CO2 emissions with a solar system for domestic hot water production
  • Self diagnosis simplifies maintenance by indicating system faults or operating anomalies
  • Simultaneous cooling and heating operation from one system
  • Single phase floor standing indoor unit up to 16kW
  • Slim indoor unit (300mm built-in height) suited for narrow ceiling installation
  • Slim unit , only 300mm and therefore narrow ceiling voids are no longer a challenge
  • Smart energy management tools enable monitoring if energy use is according to plan and help detect the origins of energy waste, thus maximizing efficiency
  • Solar support of domestic hot water with pressurised solar system
  • Specifically designed to optimise refrigerant flow
  • Stainless steel cylinder
  • Straight duct connector mounted to discharge side
  • Suitable for IT server rooms and telecom applications with rotation, back up and alarm function
  • Thanks to the unique free hanging coil of the outdoor unit, the defrost cycle is improved, resulting in lower running costs and no ice build-up
  • The Auto-Adapt function programs the thermostat according to the insulation of your house and the outdoor temperature. You will receive a personal energy savings report each month via e-mail, allowing you to monitor your energy consumption and to schedule your heating more efficiently
  • The Sky Air inverter is developed for use in light commercial applications, provides a more comfortable environment and offers great savings in energy consumption to shop, restaurant and office owners
  • The indoor unit distributes air at the sound of a whisper. The noise produced amounts to barely 22dB(A) in cooling and 19dB(A) in radiant heat mode. In comparison, the ambient sound in a quiet room amounts to 40dB(A) on average.
  • The infrared remote control is user friendly and equipped with a timer function that enables you to programme the unit to start or stop at your desired time.
  • The system provides optimized air conditions such as fresh air and humidity control etc. and can be used in small warehouses, showrooms and offices.
  • The unit's compact dimensions makes it ideal for bedrooms
  • Thermostatic expansion valve ensuring optimum capacity in accordance with the required load for better energy efficiency
  • Three phase floor standing indoor unit up to 16kW
  • Three phase outdoor unit with bottom plate heater
  • To hide the gap between decoration panel and the ceiling
  • To use for RZQ(S)G three phase units in combination with FCQG35-71 or FCQHG71
  • Top efficiency: - Energy labels up to A++ (cooling) /A+ (heating) for RZQG71/100L9V1 + FCQG71/100F - compressor that offers substantial efficiency improvements - control logic that optimises efficiency at the most frequently encountered operating conditio
  • Turbo mode allows to rapidly cool down the room in a couple of minutes
  • Turbo mode allows to rapidly heat up or cool down the room in a couple of minutes (20-25-50-60 class)
  • Unique VRV heat pump for indoor installation
  • Unloading to 10% of ful load provides improved stability of the chilled water temperature and less harmful cycling of compressors
  • Unrivalled flexibility because the unit is split up into two elements: the heat exchanger and the compressor
  • Up to 2 indoor units can be connected to 1 siesta multi outdoor unit; all indoor units are individually controllable and do not need to be installed in the same room or at the same time. They operate simultaneously within the same heating or cooling mode.
  • Up to 2500 units / rooms can be connected
  • Up to 27.0kW in heating mode
  • Up to 3 indoor units can be connected to 1 siesta multi outdoor unit; all indoor units are individually controllable and do not need to be installed in the same room or at the same time. They operate simultaneously within the same heating or cooling mode.
  • Up to 50% energy savings with brushless DC motor technology compared to traditional technology
  • Wall mounted gas module
  • Whisper quiet in operation down to 23 dBA
  • Whisper quiet operation: down to 24.5dBA sound pressure level
  • Wide outdoor unit range: from 8 to 36HP via 1 single refrigerant circuit
  • Wide range of indoor units: possibility to combine VRV with stylish indoor units (Daikin Emura, Nexura, ...)
  • Wired remote control for pump station EKSRDS1A, connectable to pressurised solar system
  • Wireless room thermostat
  • With a gas cooled PCB reliable cooling is guaranteed as it is not influenced by ambient temperature
  • "Free" heating and hot water production provided by transferring heat from areas requiring cooling to areas requiring heating or hot water
  • 2-area intelligent eye: air flow is sent to a zone other than where the person is located at that moment; if no people are detected, the unit will automatically switch over to the energy-efficient setting. (larger capacity area)
  • 50Hz units
  • Air can be discharged in any of 4 directions
  • All components can be accessed, making maintenance quick and easy
  • All the units can be modularly designed to facilitate the transport and the assembly on site
  • Amongst the most quiet units in the market (63dBA - sound power)
  • Assymetric combination is allowed: combination of different indoor units with different capacities
  • Auto cleaning filter option ensures maximum efficiency, comfort and reliability by regular filter cleaning
  • Auto swing function ensures efficient air and temperature distribution and prevents ceiling soiling
  • Available in 200 and 260 liters
  • Avoid energy use by operation of air conditioning and central heating system at the same time through interlock
  • Blue fin anti corrosion protection
  • Can be used with Split and multi split systems
  • Capacity 150 litres
  • Capacity of 4 to 16kW, storage tank content of 300 litres
  • Capacity of 4 to 16kW, storage tank content of 500 litres
  • Combination of domestic hot water cylinder and instantaneous water heater using fresh water technology
  • Compact dimensions allows for small installation space, as almost no side clearances are required.
  • Compact dimensions and limited pipework allow for installation in very restricted spaces
  • Connects to Oracle PMS (Property management System)
  • Contemporary design
  • Continuous heating (resulting in a higher integrated heating capacity)
  • Continuous modulation of fan speed resulting in reduced sound emissions, in comparison with fixed speed AC motor fan coil units
  • Copper pipes in the heat exchanger for a long service life
  • Create a comfortable home climate at any time and at any place
  • Depending on outdoor temperature, energy prices and internal heat load, Daikin Altherma hybrid heat pump always selects the most economical mode to operate
  • Detailed monitoring and control of the VRV total solution
  • Different types of indoor units can be connected: e.g. wall mounted, ceiling mounted cassette corner, concealed ceiling unit
  • Dual independent refrigerant circuit for built-in redundancy and reliable operation
  • Easy 'plug and play' installation
  • Easy commissioning: intuitive interface for advanced menu settings
  • Easy installation: no water tank pressure and only limited pressure in the heat exchanger
  • Easy maintenance: filter can be removed from both sides and beneath (maximum filter size is 400mm)
  • Easy operational management of zones or independent units
  • Energy saving with PIR & Di connection
  • Enhanced comfort: the 3 operating modes will give an answer to all your needs
  • Extremely fast to assemble thanks to quick connection joints
  • Flexible configuration with respect to heat emitters
  • Free cooling possible when outdoor temperature is below indoor temperature (eg. during nighttime)
  • Free heating provided by transferring heat from areas requiring cooling to areas requiring heating or hot water
  • Fresh water principle: hygienic water, with no need for thermal legionella disinfection
  • Guarantees operation in both heating and cooling mode down to -15°C
  • Heat pump version with reversibility on water side (up to 65°C hot water production)
  • High efficiency collectors transfer all the short-wave solar radiation into heat as a result of their highly selective coating
  • High external static pressure facilitates unit use with flexible ducts of varying lengths
  • High heating efficiency up to 108%
  • High temperature application: up to 80°C without electric heater
  • Highly efficient fans with patented blade profile for quiet operation
  • Humidification of the incoming air results in comfortable indoor humidity level, even during heating
  • Ideal for remote rooms as no drain piping is needed
  • Improved comfort as a result of better airflow distribution from the vertical out blow which allows manual adjustment of air outlet blades at the top of the unit.
  • Incorporates VRV IV standards & technologies: Variable Refrigerant Temperature, VRV configurator, 7 segment display and full inverter compressors, 4-side heat exchanger, refrigerant cooled PCB, new DC fan motor, ...
  • Individual flap control: flexibility to suit every room layout without changing the location of the unit!
  • Instant adjustment to temperature and relative humidity changes
  • Integrated electrical heater concept (no additional accessories required)
  • Integrated heat recovery system
  • Integrated humidifier available depending on model to have one unit which covers it all: perfect humidity & temperature control
  • Integrated indoor unit: all-in-one floor standing unit including the domestic hot water tank
  • Its low height (620 mm) enables the unit to fit perfectly beneath a window
  • Large air flow: 450m³/h in turbo mode
  • Large capacity unit: up to 31.5 kW heating capacity
  • Large hot water storage tank to provide domestic hot water at any time
  • Less intrusive and time consuming installation compared to installing a new system, as the refrigerant piping can be maintained
  • Lightweight plastic tank with exceptional hygienic benefits
  • Low built-in height
  • Low sound mode available reducing sound emissions significantly without giving in on refrigeration capacity
  • Lower associated CO2 emissions thanks to the heat pump technology
  • Lowest sound level in the market: down to 36dBA!
  • Lowest sound levels in the market: down to 25dBA!
  • Makes it possible to install the air conditioner even with limited false ceiling space
  • Manage multiple sites. Modular concept allows your cloud to grow with your business
  • Maximum flow temperature 55°C
  • Maximum flow temperature 80°C
  • Maximum heating comfort and domestic hot water when it is most needed
  • Medium external static pressure up to 140Pa facilitates using flexible ducts of varying lengths
  • Medium external static pressure up to 44Pa facilitates unit use with flexible ducts of varying lengths
  • Minimal starting currents
  • Minimal starting currents and short payback times
  • Modular design for use in small to large applications as simple A/C control or small BMS controlling lights, pumps,... via WAGO I/O
  • Monitor your energy consumption on a daily, weekly or yearly basis and consult energy consumption graphs. Set your holiday schedule when absent for a longer period.
  • New dual stage intercooler circuit enabling refrigerant control within the CO2-based VRV system
  • Oil blue burner, integrated regulated high-efficiency pump, LAS connection and condensate treatment and outdoor temperature sensor
  • On-roof, in-roof and flat-roof installation
  • Operation of an entire plant via a single controller, even remotely through the internet
  • Optimal domestic hot water performance: the low temperature evolution enables high tapping performance
  • Option cannot be combined with auto cleaning panel
  • Outdoor units are fitted with either a rotary or scroll compressor, renowned for low noise and high energy efficiency
  • Outdoor units are fitted with either a swing or scroll compressor, renowned for low noise and high energy efficiency
  • PCB board and hydraulic components are located in the front for easy access
  • Powerful ventilation refreshes the room within 2 hours
  • Predefined combinations with Daikin Modular air handling unit offer ready to use 'fresh air packages'
  • Pump station and control provide the transfer of solar heat to the domestic hot water tank
  • Quick and easy installation thanks to factory-fitted piping on top of the unit and reduced overall weight
  • Reduced sound version for ultra sound sensitive projects
  • Reduces maintenance costs as no yearly refrigerant containment check is required thanks to the low GWP levels
  • Reliable operation even when -25°C outside thanks to frost protection features such as free hanging coil
  • Whisper quiet operation: down to 16dBA sound pressure level
  • part KDDQ55B140-1 is also needed
  • part KDDQ55B140-2 is also needed
  • App control possible for managing heating and hot water operation
  • Bivalent system: combinable with a secondary heat source
  • Certified by TÜV Nord Testing Laboratory for Indoor Air Hygiene and the British Allergy Foundation
  • Ideal for refurbishment
  • Large operation range (ambient temperature down to -18°C and up to 52°C)
  • Contact your local sales representative for restrictions
  • Plug & play connection to Sky Air and VRV
  • SEER / SCOP up to A++
  • Seasonal efficiency values: full range A++ in cooling and heating
  • Silver allergen removal and air purifying filter: captures allergens such as pollen and dust mites.
  • Simple quick installation
  • Slimmest unit in class, only 245mm (300mm built-in height) and therefore narrow ceiling voids are no longer a challenge
  • Space saving design for flexible installation
  • Stainless steel domestic hot water tank with a volume of 180 litres
  • Stylish modern casing finished in pure white (RAL9010) and iron grey (RAL7011) blends easily with any interior
  • Suits high sensible, infrastructure cooling applications
  • The perfect balance in efficiency and comfort thanks to Variable Refrigerant Temperature: top seasonal efficiency throughout most of the year and quick reaction speed on the hottest days.
  • The white colour of the evaporator blends unobtrusively with the cold room walls
  • Turbo mode allows to rapidly heat up or cool down the room in a couple of minutes
  • Unique V-shape heat exchanger results in compact dimensions (h/e unit only 400mm high) allowing false ceiling installation, while ensuring top efficiency
  • Unique zero heat dissipation principle obviates the need for ventilation or cooling in the technical room, maximising installation flexiblity
  • Universal use thanks to intelligent store management and a power output of 0.5 - 28 kW
  • Up to 120Pa external static pressure facilitates using flexible ducts of variying lengths: ideal for shops and medium size offices
  • Up to 20% reduction in running costs
  • Up to 26.4kW in heating mode
  • Up to 43.0kW in cooling mode at 46°C
  • Up to 58 indoor units can be connected to a 36HP unit
  • Up to 70% energy savings with brushless DC motor technology compared to traditional technology
  • Up to 70% smaller and 66% lighter than previous series
  • Up to 75% smaller than equivalent products in the market, ideal for those places where space is limited
  • Valve packages are insulated, no extra drain pan required
  • Very efficient for use in rooms with high ceilings
  • When installed close to a heating device (e.g. fire place or oven) and the set temperature is reached, the fan keeps on running to have an even temperature throughout the whole house
  • Wide range of indoor units: either connect VRV or stylish indoor units such as Daikin Emura, Nexura ...
  • Wired or wireless installation
  • With integrated hygienic hot water generation in instantaneous through-flow principle
  • Greater energy savings and reduced CO2 emissions during cold season
  • 3-D air flow combines vertical and horizontal auto swing to circulate a stream of warm or cool air right to the corners of even large spaces (larger capacity area)
  • 3-speed fan motor
  • A payback period of less then 1.5 years compared to installing an electric air curtain
  • Advanced compressor technology featuring integrated inverter and variable volume ratio (VVR)
  • Air filter removes airborne dust particles to ensure a steady supply of clean air
  • Air flow distribution for ceiling heights up to 4.2m without capacity loss
  • Allows integration of server rooms into the heat recovery solution thanks to technical cooling function
  • Anti-corrosion treated heat exchangers protect the outdoor unit
  • Anti-corrosion treated plate type heat exchangers
  • Automatic filter cleaning results in higher efficiency & comfort and lower maintenance costs. 2 filters available: standard filter and finer mesh filter (for fine dust applications e.g. clothing shops)
  • Both discharge and suction ducts can be easily connected via flanges on the unit
  • Both horizontal flaps and front panel can easily be removed and washed
  • COP up to 5 with typical annual efficiencies up to 300%
  • Capacity from 11 to 16kW
  • Capacity from 6 to 16kW
  • Chilled water temperatures down to -10°C on standard unit
  • Cleaner air thanks to Daikin’s Flash Streamer technology: you can breathe deep with no worries about impure air
  • Compact & lightweight design can be stacked for maximum space saving
  • Compressor compartment insulated with suitable soundproofing material to reduce sound levels
  • Conceived for stacked installation of two single circuit units to reduce the footprint
  • Connect up to 9 indoor units, which can all be individually controlled
  • Connectable to high ambient VRV outdoor units (pair application only)
  • Continuous fans speed modulation thanks to inverter driven fans to improve part load efficiency
  • Continuous fans speed modulation with EC fans for even higher part load efficiency
  • Daikin developed interface making commissioning fast and easy
  • Daily automatic filter cleaning results in higher efficiency & comfort and lower maintenance costs. Dust can easily be removed with a vacuum cleaner without opening the unit
  • Different types of wall mounted indoor units can be connected
  • E-paper display for energy savings, autonomy and readability
  • Easy and fast installation via DIII-net protocol
  • Easy replacement of existing boiler, without changing heating pipes
  • Easy servicing & time saving commissioning with remote refrigerant containment check, simplified troubleshooting and the pre commisioning tool
  • Easy to install on roof tiles
  • Easy to use: all main functions are directly accessible. The screen turns off, when the indoor unit is not in use
  • Easy transportation as separate units will fit in an elevator
  • Electronic controller managing both temperature and humidity of the cold room
  • Energy efficient heating only system based on air to water heat pump technology
  • Energy saving thanks to key card, window contact integration and set point limitation
  • Exclusively offered for pair applications (capacity from 71 up to 140)
  • Extensive option list (heat recovery option available)
  • Extremely convenient technology for smaller spaces
  • Extremely fast to assemble, reducing installation time and cost
  • Faster installation thanks to a reduced number of brazing points and wiring
  • Fit for the future: possibility to integrate with other heat sources, e.g. fireplace
  • Fit for the future: possibility to integrate with renewable solar energy and other heat sources, e.g. fireplace
  • Flexible piping design: up to 70m piping length
  • Follow-up energy consumption to comply with local regulation and benchmark between different sites
  • Gas-adaptive combustion system Lambda Gx with fully electronic gas-air compound
  • Great benefit to overall system reliability, as clogged filters are prevented
  • High flexibility: choice between side or bottom air discharge
  • High heat and DHW comfort with integrated ECH2O Thermal store:  fresh water hygiene technology
  • High modulating range 1:8 : the capacity is adapted based on the required heat load of the house from 3 to 24 kW
  • Ideal for urban applications: sound proofing and low operating sound levels mean the unit is quiet
  • Ideal for use in larger areas
  • Improved comfort thanks to shorter defrost time
  • Incorporates VRV IV standards & technologies: Variable Refrigerant Temperature, VRV configurator and full inverter compressors
  • Individual control: up to 4 indoor units can be controlled individually
  • LCD displays text, numerals and graphics indicating temperature setting, timer setting, auto swing, fan speed etc
  • Large operation range (ambient temperature down to -18°C)
  • Low investment cost: no need to replace the existing radiators (up to 80°C) and pipe work
  • Low maintenance: no anode means no scale and lime deposits or corrosion
  • Low refrigerant volume
  • Low sound levels thanks to optional compressor compartment soundproofing
  • Maintenance-free tank: no corrosion, anode, scale or lime deposits, and no loss of water through safety valve
  • Maximum flow temperature in heat pump operation 60°C
  • Medium external static pressure up to 200Pa facilitates using flexible ducts of varying lengths
  • Medium external static pressure up to 40Pa facilitates unit use with flexible ducts of varying lengths
  • Modulation ratio of 1:5 (20% – 100%) for optimum adaptation to the output demand
  • Monitor your energy consumption on a daily, weekly or yearly basis and save power consumption with power limitation and econo mode. Set your holiday schedule when absent for a longer period.
  • Multiple options available: sound proof cabinet, rapid restart, removable electrical panel, etc. to adapt the unit to your specific application and need
  • New remote control design, also in high quality matt white finish to give a perfect match with the indoor unit
  • No need to clean filters, thanks to the self cleaning filter
  • Onboard digital electronics provide smart controls
  • Optimise your air conditioning system by activating a series of energy saving functions (temperature range limit, setback function, off timer, …)
  • Optimum water hygiene
  • Patented and multi-award winning TWINTEC technology
  • Perfect comfort: simultaneous heating and cooling
  • Powerful air purification increases indoor air quality with Daikin Flash Streamer technology
  • Quick, easy and compact installation thanks to our optional pre-assembled B-pack, containing all auxiliary components
  • Quiet operation: down to 23dBA sound pressure level
  • Reduced energy consumption thanks to specially developed DC fan motor and drain pump
  • Reduced footprint thanks to the V-shaped frame
  • Reduced installation time and cost
  • Replace existing R-22 or R-407C systems without having to replace the piping
  • Requires very little installation space as the depth is only 200mm
  • Robust design and body quality
  • Seasonal efficiency values up to A in cooling and heating
  • Seasonal efficiency values up to A+ in cooling and A in heating
  • Seasonal efficiency values up to A++ in cooling and A+ in heating
  • Seasonal efficiency values: A in cooling and heating
  • Seasonal efficiency, optimized for all seasons.
  • Selectable horizontal out blow to better suit the layout of the room (via wired remote controller BRC1E*)
  • Selectable horizontal out blow to better suit the layout of the room (via wired remote controller BRC1E52)
  • Single phase power supply and low starting currents make the unit ideal for residential applications
  • Small installation footprint of 600x600mm
  • Solar connectivity: empower your house with renewable energy
  • Standard air filter removes airborne dust particles to ensure a steady supply of clean air
  • Standard night quiet mode
  • Suits computer room applications (EDP)
  • Super efficient centrifugal fans (over 50% efficiency increase compared to sirocco fan)
  • The connecting port faces downward, eliminating the need to attach auxiliary piping
  • The perfect personal comfort for guests/tenants via simultaneous cooling and heating
  • The plug and play control system allows the user to determine a wide range of settings, resulting in excellent operational flexibility
  • The simplified user interface can only be used in combination with the main user interface
  • The ultimate heating solution for residential and commercial applications based on air to water heat pump technology
  • The unit's compact dimensions makes it ideal for renovation projects, especially for above door installation
  • The unit’s sleek design blends in with other household appliances.
  • Turbo mode enables you to rapidly heat up or cool down during 20 minutes, e.g. when you come home on a hot day, rapid cooling is required. After 20 minutes, the unit returns automatically to its previous settings.
  • Unique automatic refrigerant charge eliminates the need to calculate refrigerant volume and allows safe replacement of competitor replacement
  • Unloading to 5% of full load provides improved stability of the chilled water temperature and less harmful cycling of compressors
  • Up to 113Pa external static pressure facilitates using flexible ducts of variying lengths: ideal for shops and medium size offices
  • Uses heat pump technology to produce hot water efficiently, providing up to 17% savings compared to a gas boiler
  • Variable frequency drive (VFD) providing very high part load efficiency, great unloading capacity, automatic speed adjustment and soft start
  • Very compact and very efficient
  • Wall mounted installation facilitates cleaning beneath the unit where dust tends to accumulate
  • Water supply down to -15°C
  • Whisper quiet operation: down to 17dBA sound pressure level
  • Wide operating range in both heating and cooling mode
  • Wide operating range in cooling mode
  • Wide operation range: down to -7 ⁰C outside temperature with the heat pump, below -7 ⁰C electrical heating element support
  • Wide range of units (4 to 12HP) suitable for projects up to 200m² with space limitations
  • Wide range of units offers maximum application potential
  • Wired electronic controllers range
  • Wireless remote control up to 9 m distance
  • With integrated 3-way valve for storage tank charging
  • A special acryl precoated fin for anti-corrosion treatment on the heat exchanger ensures greater resistance against severe weather conditions
  • All indoor units connectable to one BS box
  • Anti-corrosion treated outdoor heat exchanger fin
  • At necessary intervals, the indoor unit can heat up the water to 60°C to prevent the risk of bacteria growth
  • Available static pressure up to 50Pa
  • Best surface-to-capacity ratio
  • Bi-zone allows temperature monitoring for 2 zones. Connect underfloor heating to radiators to optimise efficiency
  • Built-in Hydraulic kit: no buffer tank required, standard inverter driven pump, main flow sensor and switch included.
  • Built-in hydronic module: no buffer tank required and a standard pump and main switch are included
  • Certified by TÜV Nord Testing Laboratory for Indoor Air Hygiene
  • Check weather conditions & forecasts at unit location
  • Combinable with high temperature radiators
  • Combinable with slim concealed ceiling units
  • Combine it with solar heating for even better energy efficiency
  • Combine with a stainless steel tank or ECH2O thermal store.
  • Compact design for small footprint and minimized installation space
  • Compact indoor models and twin coil structure save installation space
  • Connect up to 250 class unit (28kW)
  • Customised to meet your building's needs: up to 10 indoor units can be connected to 1 outdoor unit
  • Daily automatic filter cleaning results in higher efficiency & comfort and lower maintenance costs. 2 filters available: standard filter and finer mesh filter (for fine dust applications e.g. clothing shops)
  • Dehumidification system reduces the level of humidity in the room while the room temperature remains the same.
  • Designed to combine with multi outdoor units only
  • Easy installation and maintenance
  • Easy installation and maintenance thanks to improved body structure
  • Easy integration of thermal solar and a further additional heat generator
  • Electrical back-up (2.5 kW) ensures hot water under all circumstances. The 500L tank can also be equipped with an external hydraulic back-up.
  • Extended operation range down to -20°C in heating and down to -15°C in cooling
  • Fast-on connections for electrical options: no tools needed
  • Flexible setback function ensures room temperature remains within comfortable limits to ensure guest comfort
  • For easy mounting, the drain pan can be located to the left or right of the unit
  • Free cooling and fresh air intake possible with optional economiser
  • Guarantees operation in heating mode down to -15°C
  • Heat recovery systems offer the highest comfort, including individual change-over of each BS box without disruption of other BS boxes
  • Heat recovery wheel: sorption and sensible technology
  • Heating and cooling in one system
  • Heating only
  • High ESP allows flexible installation
  • High efficiency and reliable scroll compressor
  • High efficiency flooded type shell and tube evaporator/condensers
  • Highly flexible solutions: multiple sizes, piping topologies and connection valves
  • Incorporates VRV IV standards & technologies: Variable Refrigerant Temperature and full inverter compressors
  • Incorporates VRV IV standards & technologies: Variable Refrigerant Temperature, VRV configurator, 7-segment display and full inverter compressors
  • Incorporates VRV IV standards & technologies: Variable Refrigerant Temperature, continuous heating, VRV configurator, 7 segment display and full inverter compressors, 4-side heat exchanger, refrigerant cooled PCB, new DC fan motor
  • Increased piping flexibility: maximum piping length: 165m, increased total piping length: 1,000m
  • Integrated back-up heater choice of 3, 6, 9 kW as well as back-up heater less models are available
  • Integrated convenience electronic control
  • Integrated safety group, diaphragm expansion vessel, flue gas test adapter DN 60 /100 and weather-controlled Regulation2
  • Integrated solar option
  • Keep track of your energy consumption with the kWh indication showing an indicative electricity consumption
  • Large operation range: ambient temperatures up to 52°C and down to -18°C
  • Lightweight and robust build of the unit combined with the cascade principle offers flexible installation options
  • Lower maintenance costs thanks to auto cleaning function.
  • Maintenance operations can be performed easily from the front of the unit
  • Maximum piping length up to 100m
  • Maximum piping length up to 200m and outdoor-indoor unit level difference up to 30m
  • Microchannel condensers available in order to reduce the refrigerant charge as much as possible and ensuring higher energy efficiency
  • New generation control panel: possibility to connect it to classic remote management systems or to a Modbus system
  • On-board sophisticated electronics and user-friendly touch screen operator interface allow smart control also in case of power failure
  • Online controller: control your indoor from any location with an app, via your local network or internet
  • Outdoor units for pair application
  • Perfect comfort: faster response than traditional heating systems and a constant indoor temperature
  • Performance modulating operation, inverter technology
  • Plug and play system reduces installation time and cost
  • Possibility to change ESP via wired remote control allows optimisation of the supply air volume
  • Possibility to connect thermal solar collectors to the domestic hot water tank
  • Prevent energy losses from over-ventilation while improving indoor air quality with optional CO2 sensor
  • Prevent energy losses from over-ventilation while maintaining indoor air quality with optional CO2 sensor
  • Provides sufficient heat in renovation applications as all heat loads are covered up to 32kW
  • Provides virtually free air curtain heating via recovered heat from indoor units in cooling mode (in case of VRV heat recovery)
  • Seasonal efficiency values up to A+ in cooling and heating
  • Seasonal efficiency values: A+ in cooling and heating
  • Seasonal efficiency values: full range A+++ in cooling and heating
  • Several languages possible depending on the model : English, German, Dutch, Spanish, Italian, French, Greek, Russian, etc.
  • Shorter heat up time compared to standard VRVIII heat pump
  • Single phase power supply for residential applications, three phase power supply model available for light commercial applications
  • Solar support of domestic hot water with pressureless (drain-back) solar system
  • Space heating support possible (500l tank only)
  • Stainless steel plate heat exchanger
  • Stylish unit blends easily with any interior. The flaps close entirely when the unit is not operating and there are no air intake grilles visible
  • The modularity of the Conveni-pack system maximises installation flexibility. Outdoor units can be grouped into blocks or rows, or distributed around the building, to meet individual installation constraints
  • The optimised compressor range and increased condenser surface deliver high levels of energy efficiency and reliability is ensured by using high quality components and production processes
  • The service valves are hidden inside the casing.
  • Total solution thanks to integration of 3rd party equipment via input
  • Unique automatic air flow adjustment makes installation shorter and easier: no balancing of dampers is required
  • Use of universal symbols, no text
  • User interface with thermostat function for higher comfort, quick commissioning, easy servicing and energy management to control energy consumption and costs
  • Whisper quiet operation: down to 25dBA sound pressure level
  • Whisper quiet operation: down to 28dBA sound pressure level
  • Wide angle louvers provide a comfortable air flow throughout the entire room
  • Wide offer in control possibilities: control w: Off the shelf control of air temperature via any DDC controller; control x: Precize control of air temperature requireing a preprogrammed DDC controller (for special applications); control y: Control of refrigeratn temperature via Daikin control (no DDC controller needed); control z: Control of air temperature via Daikin control (no DDC controller needed)
  • Wide operating range
  • With 3‐way valve, ideal for use in conjunction with thermal stores
  • Control several indoor units at the same time via the Siesta Sky Air group control (optional)
  • Different air flow configurations can be easily selected via the remote control for even more comfort
  • Direct driven centrifugal fans
  • H2O piping between outdoor unit and indoor heat emitters
  • Increased safety with 2 cut-outs: manual & automatic
  • Large operation range (ambient temperature up to 43°C)
  • Possible to connect to photovoltaïc solar panels to optimise self-consumption of electricity produced
  • Remote detection of failures
  • Seasonal efficiency values up to A++ in cooling and heating
  • Seasonal efficiency values up to A+++ in cooling and A++ in heating
  • Smaller piping diameters compared to R-410A VRV system
  • Space saving contemporary wall mounted design
  • Standard wired remote control enables setting of different set points (cooling, heating, water leaving temperature) or based on outdoor conditions (weather dependent control). It has an alarm history, night time noise reduction function and is language based.
  • Two selectable thermo-sensors
  • VRV (Variable Refrigerant Volume) technology for flexible application range
  • 2-3 truly independent refrigerant circuits
  • Air suction from underneath
  • BMS integration thanks to volt relay for error indication and 0~10VDC input for setpoint control
  • Demand contol decreases the power consumption to 70% or 40% when other larger appliances need to be switched on (Sky Air only)
  • Developed for easy installation and servicing: choice between top or front connection for refrigerant piping and rotating switch box for easy access to serviceable parts
  • Double protection drainage system
  • Electric heater: no relay up to 2kW capacity
  • Low sound level including "night mode" operation
  • Third-party products and services integration via FTTT
  • Up to 16kW capacity available per port
  • Whisper quiet operation: down to 29dBA sound pressure level
  • Wide range of connectable indoor units
  • Choice between 3 auto swing positions for maximum comfort: standard, draught prevention, ceiling soiling prevention
  • Connect up to 250 class unit (28kW) by combining 2 ports
  • Electric heater: equipped with two overheat cut-out thermostats
  • High efficiency filters available in F6 ,F7, F8 grades
  • Maximum energy efficiency stemming from almost zero down flow turbulence, optimised air flow and the application of advanced discharge rectifier technology
  • Optional medium and fine dust filters M6, F7, F8 to meet customer request or legislation
  • Seasonal efficiency values up to A+++ in cooling and heating
  • The quiet mode function can be selected to reduce the sound of the outdoor unit
  • Achieving building comfort conditions much faster at start-up
  • Around 85% air separation efficiency, greatly reducing both heat loss and required indoor unit heating capacity
  • No need for fuel storage tanks or pumps
  • Shorter installation time thanks to easy adjustment of nominal air flow rate, so less need for dampers compared with traditional installation.
  • Built-in high pressure drain pump with 700mm lift
  • Dedicated unit to allow multi combination of 2 x 15 HP or 2 x 20 HP resulting in less pipework or installation time
  • Inverter fans management for enhanced part load efficiencies
  • Infrared remote control as standard with decoration panel kit
  • Lowest installation height in the market: 214mm for class 20-63
  • Standard operation range down to -12°C
  • Supports multiple languages: English, German, French, Dutch, Spanish, Italian, Portuguese
  • Electronic room thermostat
  • All hydronics can be accessed easily from 3 sides (no surrounding cabinet)
  • Compressors and controls at unit side
  • Vertical solar collector for domestic hot water production
  • Wide outdoor unit range: from 5 to 54HP via 1 single refrigerant circuit
  • 360° air discharge ensures uniform air flow and temperature distribution
  • All models are PED pressure vessel approved
  • Compact dimensions, can easily be mounted in a narrow ceiling void (unit height: 240mm)
  • Extended operation range down to -20°C in heating
  • Movement sensor saves power consumption in unoccupied rooms: when the room is empty, the unit switches to economy mode after 20 minutes and restarts when a person enters the room.
  • Outdoor units for multi model application
  • Remarkable blend of iconic design and engineering excellence with an elegant finish in brushed aluminium or matt crystal white
  • Reversible monobloc
  • Weekly timer can be set to start heating or cooling anytime on a daily or weekly basis
  • Form. Function. Redefined. Daikin Emura represents a perfect mariage of style and substance, of form and function, of intelligent heating and efficient cooling.
  • Good design award: unique evaluation criterion for industrial design in Japan
  • 2 area intelligent eye: air flow is sent to a zone other than where the person is located at that moment; if no people are detected, the unit will automatically switch over to the energy-efficient setting.
  • 3, 4 or 6 stage row cooling coil
  • 4 way air discharge and air swing
  • Acryl pretreated outdoor unit heat exchanger PE fins improve resistance to salt corrosion and atmospheric pollution and increase unit durability
  • Advanced control possibilities
  • Inverter-controlled scroll compressor
  • Standard integrated: main switch, water filter, flow switch, air purge, pressure ports
  • All indoor units can be individually controlled and do not need to be installed in the same room or even at the same time.
  • Complete range of models: 5-31.5kW
  • Condenser leaving water temperatures (CLWT) up to 65°C (optional)
  • Cooling range: 254-583kW
  • Wired room thermostat
  • EER range: 4.28 to 4.66
  • Heating and cooling mode, with possibility to disable cooling mode if not required
  • Comfort function mode activates the programmed temperature levels intended for a home occupied during the day; default setpoints are 21°C in heating mode and 24°C in cooling mode and can be changed by the user
  • Super wide operating range for hot/cold water production from -20 to +43°C ambient outdoor temperature
  • An inverter driven compressor allows the capacity to be adjusted precisely to match variations in room and outside temperatures
  • Increased piping flexibility: 135m piping length without restrictions on indoor unit installation position, resulting in greatly improved planning flexibility
  • Reduced function mode activates the programmed temperature levels for periods when the house is unoccupied or at night; default setpoints are 17°C in heating, 28°C in cooling mode and can be changed by the user
  • Saves time on system design as all water-side components are fully integrated with direct control over leaving water temperature
  • During start up, the room can be cooled down or heated very quickly; once the temperature in the room has reached its set point, the low power operation starts to save energy.
  • Scheduled function mode: uses a timer to schedule heating and cooling setpoints throughout the day; up to 12 setpoints can be programmed per day; the selected setpoints will be automatically activated at the scheduled time
  • Space saving contemporary wall hung design
  • Chiller series design entirely based on new European directives (EN14511, EN14825)
  • Easy dust removal with vacuum cleaner without opening the unit.
  • Extension possible to 195kW
  • Flexible to install as the largest casing only weighs 17kg and piping connection can be done at the bottom, left or right of the unit
  • High flexibility for a wide variety of applications
  • Holiday function mode: intended for setting reduced and fuel-efficient setpoints when the house is unoccupied for long periods. The default setpoints are 14°C for heating and 30°C for cooling.
  • Low energy consumption thanks to DC fan motor
  • Low operating sound levels are achieved by the latest compressor and fan design
  • No gas connection or oil tank needed
  • The unit can be equipped with a hydraulic module optimizing installation time, space and cost
  • Two optional intelligent sensors improve energy efficiency and comfort.
  • Adjustable fan pulley as standard to meet a wide range of supply air volumes and external static pressures
  • Allows sequencing control (up to 4 units) without any external device
  • Anti-corrosion treated coil
  • Auto swing function ensures efficient air distribution via louvers that close automatically when the unit is switched off
  • Can easily be installed in both new and refurbishment projects
  • Dry contacts and Modbus interface for monitoring and control of Daikin Altherma high temperature and Flex Type, VRV hydrobox and inverter chillers
  • Energy efficient unit with high EER/COP values
  • Extensive range of outdoor units: from 8 to 30HP (9 configurations in total)
  • Increased EER/COP thanks to the redesigned 8HP unit
  • Integration of Daikin's product portfolio with other building management systems
  • Best in class energy efficiency (EER up to 3.7 and ESEER up to 4.63)
  • Ceiling soiling prevention prevents air from blowing out too long in horizontal position, to prevent ceiling stains.
  • Centralised control of several units can be achieved via 3 wired controls: centralised remote control, unified on/off control, schedule timer
  • Cooling function available on demand
  • Cooling range: 161-526kW
  • Cooling range: 328–1,422kW
  • Cooling range: 333–1,510kW
  • Cooling range: 334–1,893kW
  • Cooling range: 369–1,050kW
  • Energy efficient heating and cooling system based on air source heat pump technology
  • Energy efficient heating system based on air source heat pump technology, lowering energy bills and CO2 emmisions
  • Energy efficient units: high EER values
  • Daikin Emura has been awarded many times, thanks to its excellent design
  • Energy saving during standby mode: reduces current consumption by about 80% when operating In standby. If no people are detected for more than 20 minutes, the system will automatically switch to the current-saving mode.
  • Floor temperature control wire
  • Heating only monobloc
  • Heating only monobloc with bottom plate heater
  • High efficiency
  • High efficiency and extra low noise
  • Improved Seasonal efficiency - SEER: up to 4.53! (PrEN14825 - inquiry version 2010)
  • Improved Seasonal efficiency - SEER: up to 4.67 (PrEN14825 - inquiry version 2010)
  • Increased EER/COP thanks to the redesigned 8 and 12HP stand alone units and 8HP modular unit
  • Innovative VRV technology combined with stylish and silent indoor units
  • Large capacity indoor unit
  • Central control to reduce energy consumption and carbon emissions, while maintaining excellent levels of comfort.
  • Extended operation range (inlet water temperature) down to -10°C in heating
  • Integrates basic control of HRV units (ON/OFF, fan speed)
  • Stable heating capacity and high COP values at low ambients thanks to the two stage compression technology (COP values of 3.0 and more at -10°C)
  • Super wide range of indoor units
  • Up to 39 indoor units can be connected to a 18 HP unit
  • 24/7 monitoring of the system for malfunctions in a total of 80 components
  • EER range up to 2.83
  • High heating efficiency at low water entering temperatures (eg. 3.44 COP at -10°C entering water temperature for an 8HP unit)
  • Increased comfort with integration of CO2 sensors for fresh air volume control
  • Maintenance operations can be performed by removing the front panel
  • Modern style decoration panel in white (RAL9010)
  • Online controller (optional): control your indoor unit from any location via smartphone, laptop, pc, tablet or touch screen
  • Optimised for use with R-407C
  • Optimised heating solution for your home
  • Outdoor units are fitted with a scroll compressor, renowned for its low noise and high energy efficiency
  • Reversible monobloc with bottom plate heater
  • Seasonal efficiency values up to A+
  • Single phase large capacity indoor unit
  • Single phase reversible monobloc
  • Small capacity indoor unit
  • Standard efficiency extra low noise
  • Standard seasonal efficiency
  • Stylish design
  • The intelligent auto-adaptive function delivers cost savings by learning when hot water is needed and adapts the settings to ensure only that water is heated.
  • The ultimate flexible heating solution for apartment buildings and collective housiing
  • Three phase large capacity indoor unit
  • Three phase large capacity outdoor unit with bottom plate heater
  • Top energy efficiency in Daikin heat pump range, thanks to the redesigned 8HP unit and newly developed 12HP high COP unit
  • Total heat recovery up to 85% or desuperheater up to 60°C leaving water temperature
  • Unique range of single and multi BS boxes for flexible and fast design
  • User friendly simplified remote control with contemporary design
  • Wide capacity range: 16 sizes to cover a range from 647 to 1,922 kW
  • Discreet, modern design. Its smooth curve blends beautifully with the wall resulting in an unobtrusive presence that matches all interior décors.
  • 'High sensible mode': allows the VRV system to work with increased sensible capacity in cooling mode, resulting in higher efficiency and improved comfort
  • Air discharge from the corners avoids dead zones that may be subject to temperature differences
  • Connectable to all multi indoor units, including Daikin Emura
  • Cooling range: 362–1,134kW
  • Cooling range: 388-2,093kW
  • Cooling range: 431-2,196kW
  • Customised to meet your building's needs: 10 indoor units to be connected to 1 outdoor unit
  • Daikin scroll compressor
  • Daikin semi-hermetic single screw stepless compressor
  • Doubling up of major components provides the equivalent of two chiller units in one base frame
  • EER range from 3.48 to 3.70
  • EER range: 3.51 to 3.91
  • EER range: 4.1 to 4.6
  • ERQ is among the first DX systems suitable for connection to air curtains
  • Energy efficient heating and cooling system based on air to water heat pump technology
  • Energy efficient units: full range A class energy labels (4.58 COP)
  • Floor temperature protection allows the user to set maximum and minimum floor temperatures to keep actual temperatures safely within the range allowable for the selected floor material.
  • H2O piping between outdoor unit and indoor heating appliances
  • Highly heat insulating storage tank with a capacity of 300 or 500 liters
  • Ideal for comfortable air flow in wide rooms thanks to Coanda effect: up to 100° discharge angle
  • Ideal solution for shops, restaurants or offices requiring maximum floor space for furniture, decorations and fittings
  • Improved indoor air quality: several optional filters are availble to improve the indoor air quality.
  • Low operation sound level down to 25dBA
  • Major reduction in installation time thanks to wide range, compact size and light weight multi BS boxes
  • Possibility to control multiple Split indoor units via app
  • Possibility to control over multiple unit locations
  • Stainless steel domestic hot water tank
  • Standard inverter fans and exchanger heatertape
  • Thanks to the inverter technology, an energy-saving fast heat-up time and accurate temperature control is delivered
  • The use of inverter type outdoor units results in an air conditioning system with a high energy efficiency
  • Up to 2 indoor units can be connected to 1 Multi outdoor unit; all indoor units are individually controllable and do not need to be installed in the same room or at the same time; they operate simultaneously within the same cooling or heating mode
  • Up to 3 indoor units can be connected to 1 multi outdoor unit; all indoor units are individually controllable and do not need to be installed in the same room or at the same time. They operate simultaneously within the same heating or cooling mode.
  • Up to 4 indoor units can be connected to 1 multi outdoor unit; all indoor units are individually controllable and do not need to be installed in the same room or at the same time. They operate simultaneously within the same heating or cooling mode.
  • Up to 4 indoor units can be connected to 1 multi outdoor unit; all indoor units are individually controllable and do not need to be installed in the same room or at the same time; they operate simultaneously within the same cooling mode
  • Up to 5 indoor units can be connected to 1 multi outdoor unit; all indoor units are individually controllable and do not need to be installed in the same room or at the same time; they operate simultaneously within the same cooling or heating mode
  • VRV is among the first DX systems suitable for connection to air curtains
  • Whisper quiet operation: down to 22dBA sound pressure level
  • Wide range of indoor units: 15 different models in a total of 76 variations
  • Wide range of outdoor units: from 8 to 48HP in 2HP increment steps (21 system combinations)
  • 15 class unit especially developed for small or well-insulated rooms, such as hotel bedrooms, small offices, etc.
  • 24 hour timer can be set to start cooling anytime during a 24 hour period
  • Auto swing function ensures efficient air and temperature distribution
  • Auto-restart ensures that the unit restarts automatically at the original settings after power failure
  • Belt driven fan enables air volume and static pressure to be adjusted as required.
  • By using heat from the surrounding air, the domestic hot water heat pump reduces CO2 emissions by up to 60%
  • Can be installed against a wall or recessed
  • Cassette model (C): mounted into a false ceiling leaving only the decoration panel visible
  • Compact dimensions, can easily be mounted in a narrow ceiling void
  • Compact size leaves maximum floorspace
  • Control box and expansion valve kit are required for each combination plus an air handling unit
  • DC inverter scroll compressor with economiser function results in high energy efficiency and reliable performance
  • Daikin cooling only systems are energy efficient cooling solutions for residential and commercial applications.They transfer the heat from a room or internal space to the outside air, thus coolling the inside area.
  • Daikin introduces first auto cleaning cassette to European market.
  • Different types of indoor units can be connected: e.g. wall mounted units, concealed ceiling units
  • Drain pan to collect the condensate from: heat exchanger and regulating valves
  • EER range up to 4.64
  • EER range: 4.72 to 5.12
  • Easy to install: no additional wiring is needed as the rooftop units have the economiser PCB as standard
  • Electronic DDC controller
  • Environmentally conscious HFC134a – the most thermodynamically efficient refrigerant for air cooled applications
  • Flexibility (2-pipe or 4-pipe)
  • Free-hanging model (F): easy wall mounted installation
  • Freeze protection of hydraulic parts
  • Heat pumps are all-in-one heating & cooling solutions for residential & commercial applications. They extract thermal energy from the ambient air and are therefore more energy efficient and emit far less CO2 than comparable fossil fuel based boiler systems.
  • Heating range: 270-615kW
  • High heating capacity: up to 6.6kW
  • Highly suited to densely populated areas thanks to the low operation sound and seamless integration into surrounding architecture as only the grille is visible
  • Home leave operation maintains the indoor temperature at your specified comfort level during absence, thus saving energy
  • Manually adjustable vertical louvres
  • Modern style decoration panel is available in 3 different variations: white (RAL9010) with grey louvers, full white (RAL9010) or auto cleaning panel
  • No less than 64 indoor units can be connected to a single system
  • Operation range: -5°C to 43°C
  • Recessed model (R): neatly concealed in the ceiling
  • Reduced installation time thanks to integrated pump and/or buffer tank
  • Standard long life filter
  • Stepless single-screw compressor
  • Up to 29 indoor units can be connected to a 18HP unit
  • Very high EER values at part loads condition (ESEER up to 5.77)
  • When using floor heating for cooling, the dew prevention function will make sure there will be no condensation on the floor
  • White (RAL9010), modern style decoration panel available in 2 variations: either with grey or white louvers
  • 1 and 2 stepless single-screw compressors
  • 7-speed electrical motors (with thermal protection on windings)
  • Advanced pCO² DDC controller
  • An additional user interface can be a room thermostat in the space to be heated.
  • Both option kits are designed for indoor and outdoor installation and can be wall mounted.
  • Conveni-pack’s modular design allows it to be used for smaller as well as larger shops
  • Cooling range: 165.5-555.7kW
  • Cooling range: 329-515kW
  • Cooling range: 640-1,772kW
  • Cooling range: 790-1,650kW
  • Cost effective alternative to a fossil fuel boiler
  • Daikin air conditioners are energy efficient and economical
  • Designed to perfectly balance technological leadership and the beauty of aerodynamics
  • Dry programme allows humidity levels to be reduced without variations in room temperature
  • ECONO mode decreases power consumption so that other appliances that need large power consumption can be used
  • ESEER up to 5.37
  • Easy compliance with F-gas regulation thanks to automated refrigerant containment check
  • Easy operation and maintenance
  • Even rooms with ceilings up to 3.8m can be heated up or cooled down very easily without capacity loss
  • Excellent EER and COP values
  • Extremely quiet in operation
  • Filter cleaning indicator
  • Flat top unit design allows maximum use of warehouse and container space
  • For more information on compatible VRV features contact your local dealer
  • High external static pressure (up to 78.4Pa) allows indoor installation
  • Its low height enables the unit to fit perfectly beneath a window
  • Night quiet mode automatically reduces the operation sound of the outdoor unit by 3dBA during nighttime (multi outdoor units in cooling mode only)
  • No buffertank required for standard applications
  • Optimised for use with R-134a
  • Piping connections can be accessed from underneath, front, side or rear.
  • Possibility for a 200l buffer tank
  • Possibility to control multiple indoor units via internet
  • Power consumption limit setting
  • R-410A heat pump
  • Reduced CO2 emissions thanks to the use of R-410A refrigerant and low energy consumption
  • Reduced energy consumption thanks to specially developed DC fan motor
  • Standard drain pump with 330mm lift increases flexibility and installation speed
  • Standard dual flow and temperature sensor
  • Standard phase sequence controller
  • Temperature control, fresh air provision and Biddle air curtains integrated in a single system
  • The domestic hot water tank is made of corrosion resistent stainless steel for high durability and low maintenance
  • The position of individual air discharge grilles can be altered, enabling efficient temperature distribution, even in irregularly shaped rooms.
  • Guarantees operation in both heating and cooling mode down to -20°C
  • Low operating sound level thanks to tangential fan
  • Possible to connect to photovoltaïc solar panels to provide energy for your heat pump (optional)
  • Maximum piping length up to 85m
  • Top energy efficiency in the market for both cooling and heating up to 3.15 for EER, up to 5.25 for ESEER and up to 3.33 for COP!
  • Top energy efficiency in the market for both cooling and heating: up to 3.14 for EER, up to 5.25 for ESEER and up to 3.44 for COP !
  • Unified indoor unit range for R-32 and R-410A
  • Up to 20% fresh air intake
  • Up to 36 indoor units can be connected to 1 refrigerant circuit
  • Valve packages contain balancing valves and sensor pocket
  • Weight reduced with 20% compared with the previous models.
  • Whisper quiet in operation: the operating of the unit can hardly be heard. The sound pressure level goes down to 19dBA!
  • 1 or 2 stepless single-screw compressors
  • 1-2-3 truly independent refrigerant circuits
  • 24 hour timer can be set to start heating or cooling anytime during a 24 hour period
  • 4-speed fan motor
  • All 7 speeds pre-wired in the factory in the terminal block of the switch box
  • Allows multi tenant applications (option PCB required)
  • Anti-corrosion treated aluminium coils
  • Automatic cleaning of refrigerant piping ensures a clean piping network, even when a compressor breakdown has occurred
  • Can easily be mounted in corners and narrow spaces, as it only needs 30mm lateral service space
  • Comfortable horizontal auto swing ensures draughtfree operation and prevents ceiling soiling
  • Connectability with Daikin AHUs
  • Convertible return and supply air: fan can be mounted in two directions
  • Cooling range: 186.4-603.9kW
  • Cooling range: 538-1,197kW
  • Cooling range: 569-1,013kW
  • Cooling range: 667-1,920kW
  • Cooling range: 854-1,729kW
  • Daikin outdoor units are neat, sturdy and can easily be mounted on a roof or terrace or simply placed against an outside wall
  • Decrease of temperature variation by automatic fan speed selection or freely selectable 3-step fan speed.
  • Double-intake centrifugal fans
  • Drain pump kit available as accessory
  • EER range up to 2.35
  • EER range up to 2.93
  • Eco-label certified
  • Energy efficient units: up to class A energy labels
  • Extremely low operating noise during part load cycles
  • Factory tested and pre-programmed for quick and easy installation and commissioning
  • Flexible combination of outdoor units: small footprint combination, high COP combination or any other combination of your choice
  • Flexible setting with adjustable setpoint
  • Free app available on the App Store-- lifetime support with no subscription fee
  • Guarantees operation in heating mode down to -15°C and in cooling mode down to -5°C
  • Immediate display of fault location and condition
  • Indoor unit on/off switch
  • LCD panel can also be detached and used as remote control, enabling the unit to be controlled from another room
  • Lightweight and compact
  • Low operating sound level
  • Maximum external static pressure (ESP): 150Pa
  • New three row heat exchanger developed for optimum heat exchange in the transcritical point
  • Night set mode saves energy by preventing overcooling or overheating during night time
  • Nylon filter G2 class
  • Save on running costs via pre/post trade mode, set point limitation, overall shut down
  • Standard anti-corrosion treated
  • Standard operation range down to -15°C ambient
  • Suitable for multi-storey and large buildings because of the hardly unlimited possibilities of water piping
  • Thanks to a large operating envelope, the unit is suitable for all possible process and comfort applications
  • The use of inverter type outdoor units results in an air conditioning system with a high energy efficiency and very low sound level
  • To be ordered on project base only
  • Unique automatic air flow adjustment function selects the most appropriate fan curve to achieve the best comfort. With these concealed ceiling units, over 10 fan curves can be chosen to select the most appropriate fan curve for your application
  • Units optimized for seasonal efficiency give an indication on how efficient an air conditioner operates over an entire heating or cooling season.
  • Up to 2 indoor units can be connected to 1 multi outdoor unit; all indoor units are individually controllable and do not need to be installed in the same room or at the same time. They operate simultaneously within the same heating or cooling mode.
  • Vertical auto swing moves the discharge flaps up and down for efficient air and temperature distribution throughout the room
  • 1-2-3-4 truly independent refrigerant circuits
  • 23 different air flow patterns possible
  • 3 steps in night quiet mode to reduce sound levels at night
  • 4 fan speed steps can be selected to achieve optimum comfort.
  • Accurate temperature control, fresh air provision, air handling units and Biddle air curtains all integrated in a single system requiring only one single point of contact
  • Air purification filter deodorises the air and helps to prevent bacterial and viral propagation
  • Automatic air flow adjustment function measures the air volume and static pressure and adjusts it towards the nominal air flow, whatever the length of duct, making installation easier and guaranteeing comfort. Moreover, the ESP can be changed via the wir
  • Can be used as stand alone or integrated in the Sky Air or VRV system
  • Can be used as stand alone unit or integrated in the VRV system
  • Comfort mode guarantees draught free operation by preventing that warm or cold air is directly blown on to the body
  • Comfortable vertical auto swing ensures draughtfree operation and prevents ceiling soiling
  • Customize your VRV for best seasonal efficiency & comfort with the weather dependant Variable Refrigerant Temperature function. Increased seasonal efficiency and no more cold draft by supply of high outblow temperatures
  • Customize your VRV for best seasonal efficiency & comfort with the weather dependant Variable Refrigerant Temperature function. Increased seasonal efficiency with up to 28%. No more cold draft by supply of high outblow temperatures
  • Double protection drainage system ensures quality
  • EER range up to 2.69
  • EER range up to 2.75
  • EER range up to 3.32
  • EER range up to 4.73
  • Easy and fast installation thanks to the compact dimensions and quick interconnections
  • Easy and quick to install at reduced costs since no additional water systems, boilers and gas connections are required
  • Easy combination with HRV
  • Easy maintenance
  • Easy to clean flat panel
  • Easy to clean flat suction grille
  • Easy to install
  • Efficient temperature heat-up: from 10°C to 50°C in only 60 minutes
  • Exclusively offered for pair applications
  • Fan can be mounted for horizontal or vertical air flow inlet and discharge (class 240-560 only)
  • Fits any building with either outdoor or indoor installation possible (high external static pressure up to 78.4Pa)
  • Flat back panel for easy installation
  • Flexible installation: - bottom and rear suction allow installation both in low and shallow ceiling voids - choice between free use into a false ceiling or connection to optional suction grilles
  • Flooded evaporator
  • High efficient flooded type heat exchanger allowing maximum unit performances
  • High quality, anti-corrosion treated components as standard
  • Increased piping flexibility: maximum piping length: 165m
  • Installer or technical manager can remotely login to the site in case of malfunctions for first troubleshooting
  • Intelligent Heat Store management: continuous heating during defrost mode, and use of stored heat for space heating
  • Less inspection ports needed compared to installing single BS boxes
  • Long range, 100m, wireless connection between thermostat and relay
  • Low energy bills and low CO2 emissions
  • Low starting current
  • Maximum installation height difference up to 30m
  • Maximum piping length up to 50m, minimum piping length is 5m.
  • Micro channel heat exchanger technology reduces the amount of refrigerant used in the system, lowering environmental impact
  • NOX class 5
  • No electric current surge
  • One or two truly independent refrigerant circuits for outstanding reliability
  • Outdoor unit extracts heat from the outdoor air, even at -20°C
  • Outdoor unit silent operation: "silent" button on the remote control lowers the operation sound of the outdoor unit by 3dBA to ensure a quiet environment for the neighbourhood.
  • Photocatalytic deodorising air purification filter deodorises the air, powerfully decomposes odours, removes house dust and pollen and helps to prevent bacterial and viral propagation to ensure a steady supply of clean air
  • Powerful mode can be selected for rapid heating or cooling.
  • Pressure gauges
  • Refrigerant cooled PCB guarantees reliable cooling, as it is not influenced by ambient temperature.
  • Remote electronic command station with easy-to-use user interface programmable according to various system requirements
  • Requires very little installation space
  • Set up to 3 independent schedules, so the user can easily change the schedule himself throughout the year (e.g. summer, winter, mid-season)
  • Single phase outdoor unit with bottom plate heater
  • Small capacities: 4, 5 & 6HP
  • Standard drain pump with 600mm lift
  • Super wide operating range for hot water production from -20 to +43°C ambient outdoor temperature
  • The air filter can easily be removed for cleaning
  • The heat extracted from the refrigeration showcases or evaporators can be re-used for comfort heating of the shop at no extra cost
  • The units are provided with a new generation control panel with an easy-to-use interface
  • These outdoor units can easily be installed on a roof, placed against an outside wall or can even be installed indoors
  • Wide operation range
  • Wired remote control can easily be integrated in the unit
  • 2 truly independent refrigerant circuits
  • 2-3-4 truly independent refrigerant circuits
  • 2-stage heat recovery: first stage between indoor units, second stage between outdoor units thanks to the storage of energy in the water circuit
  • 3-D air flow combines vertical and horizontal auto swing to circulate a stream of warm or cool air right to the corners of even large spaces
  • 5 different fan speeds available for maximum comfort
  • 5 interchangeable colours available
  • All year round comfort ensured by the constant discharge velocity and adjustable jet air flow width (European patent)
  • Automatic test initiating a check on the wiring, shut off valves, sensors and refrigerant volume
  • Connectable to VRV IV heat pump and heat recovery
  • Continuous comfort: Unique continuous heating technology makes VRV IV the best alternative to traditional heating systems
  • Control up to 32 indoor units
  • Digital remote controller
  • Dual air discharge flow for better air distribution
  • Easy management of the yearly energy cost thanks to a wide range of control possibilities
  • Excellent air distribution: this louver design, together with its automatic air swing function, distributes air evenly around the room.
  • Expansion valve with liquid level control
  • Flexibility via interchangeable water connection side
  • Heat loss is reduced to a minimum thanks to the high quality insulation
  • Increased installation flexibility thanks to limited dimensions
  • Integrated hydronic module on request
  • Inverter controlled scroll compressor
  • Main switch
  • Maximum piping length up to 50m, minimum piping length has no limitation
  • Maximum piping length up to 75m, minimum piping length is 5m.
  • MicroTech III controller with superior control logic and easy interface
  • No gas boiler required
  • Off function: switches the system off; however, the integrated frost protection remains activated (set by default at 4°C).
  • Optimum comfort guaranteed with automatic air-flow volume control as this minimises the difference between room and required temperature. No action required from occupants to meet the desired temperature.
  • Piping length up to 30m
  • Possibility to combine different types of indoor units: wall mounted, floor standing, concealed ceiling, ceiling suspended, round flow or 4-way blow cassettes
  • Powerful mode can be selected for rapid heating or cooling; after the powerful mode is turned off, the unit returns to the preset mode.
  • Pressure relief valve
  • Real time clock with auto update to daylight saving time
  • Seasonal efficiency values up to A+++
  • Shell and tube heat exchanger
  • Since the flaps can move to a 0 degree position, virtually no draught can be experienced
  • Standard drain pump
  • Standard drain pump with 675mm lift increases flexibility and installation speed
  • Standard evaporator heater tape
  • Standard left and right side water connection
  • Standard operation range down to -10°C
  • Standard reverse phase protection
  • Supports multiple languages (English, German, French, Italian, Spanish, Portuguese, Dutch, Czech, Croatian, Hungarian, Slovenian, Romanian, Bulgarian, Russian, Greek, Turkish, Polish, Serbian and Slovak)
  • Top serviceability level thanks to reduced weight, compact footprint and optimized components accessibility
  • Total solution for year round comfort
  • VRV configurator software for the fastest and most accurate commissioning, configuration and customisation
  • Wide range of units: air flow rate from 150 up to 2,000 m³/h
  • 2 steps in night quiet mode: step 1: 50 dBA, step 2: 45 dBA
  • 3 steps in night quiet mode: step 1: 47dBA, step 2: 44 dBA, step 3: 41 dBA
  • App control possible for managing heating, hot water and cooling operation
  • Available in heat pump and heat recovery version
  • Branch duct discharge allows to optimize air distribution in irregular shaped rooms or to supply air to small adjacent rooms
  • Built-in electric back-up heater as additional heating during extremely cold outdoor temperature
  • Compact & lightweight design can be stacked for maximum space saving: 42HP can be installed in less than 0,5m² floorspace
  • Compact casing (570mm in width and depth) enables unit to fit flush into ceilings and match standard architectural modules, without cutting ceiling tiles
  • Condenser protection grilles are available throughout the whole range
  • Ideal solution for a broad range of comfort and process applications
  • No optional adapter needed for DIII-connection, link your unit into the wider building management system.
  • Remote cooling or heating selection
  • Setpoint limitation sets the upper and lower setpoint limits within which the user can programme the desired comfort levels and can only be modified by the installer
  • Fans protected against abnormal operation
  • Number of setpoint changes: 12/day
  • Pump (low 100 kPa and high 200 kPa lift) available for evaporator and condenser
  • Reduced energy consumption thanks to specially developed small tube heat exchanger, DC fan motor and drain pump
  • Water/water heat pump, with water reversibility
  • Wide range of available options and accessories
  • Key lock function: possible to lock the keys of the room thermostat
  • Safety valves in each circuit
  • Electronic circuit breakers
  • Advanced µC²SE controller for direct connection to a Modbus based BMS or to a remote user interface
  • Electronic expansion valve
  • True dual plate brazed plate heat exchanger
  • Sight glass
  • Advanced pCO³ controller for assembly of 2 or 3 modules
  • Separate switchbox for easy access
  • Double circuit heat exchanger (from 100kW onwards)
  • Easy combination with VRV
  • Easy installation thanks to automatic refrigerant charging operation, automatic test operation
  • Efficiency gains of more than 40% can be realized, thanks to technological developments in heat pump technology and the more efficient R-410A refrigerant
  • Energy efficient heating and/or cooling system based on air source heat pump technology
  • Fits any building as also indoor installation is possible as a result of high external static pressure of up to 78.4 Pa. Indoor installation leads to less piping length, lower installation costs, increased efficiency and better visual aesthetics
  • Flexible piping design: piping length after first branch: up to 90m, maximum piping length 120m, total piping length: 300m
  • Fresh air intake integrated in the same system thus reducing installation cost as no additional ventilation device is required
  • High power air flow
  • Low installation height: 214mm for class 20-63
  • Modern style decoration panel is available in 4 different variations: white (RAL9010) with grey louvers, full white (RAL9010), auto cleaning panel or auto cleaning panel with fine mesh
  • Multi zoning kit allows multiple individually-controlled climate zones to be served by one indoor unit
  • Only those areas calling for air conditioning need to be cooled or heated; the system can be shut down completely in unoccupied rooms.
  • Optimised defrost cycles
  • Optimised for use with R-410A
  • Optional fresh air intake
  • Possible to combine with domestic hot water
  • Reddot design award winner 2013
  • Reduced energy consumption thanks to optimised condensing temperature by use of inverter fans
  • Regulating switch
  • Simplified installation & guaranteed optimal efficiency with automatic charging & testing
  • Sleek, unobtrusive air conditioning unit that matches European sensibilities regarding interior design
  • Space saving outdoor unit
  • Standard drain pump with 750mm lift increases flexibility and installation speed
  • Standard moisture indicator
  • Supports multiple languages (English, German, Czech, Croatian, Hungarian, Romanian, Slovenian, Bulgarian, Slovak, Serbian, Albanian)
  • Supports multiple languages (English, German, Dutch, Spanish, Italian, Portuguese, French, Greek, Russian, Turkish and Polish)
  • Unit dimensions allow easy transportation
  • Various control possibilities with weather dependant set point or thermostat control
  • Water flow switch
  • Whisper quiet operation: down to 23dBA sound pressure level
  • Wide piping flexibility: maximum piping length: 165m, total piping length: 1,000m
  • 3 different design options available: EUWAN chiller without integrated hydraulic module; EUWAP chiller with integrated hydraulic module (pump, expansion vessel, hydraulic components); EUWAB chiller with integrated hydraulic module (buffer tank, pump, expa
  • 3 different design options available: EUWAN chiller without integrated hydraulic module; EUWAP chiller with integrated hydraulic module (pump, expansion vessel, hydraulic components); EUWAB chiller with integrated hydraulic module (buffer tank, pump, expansion vessel, hydraulic components)
  • All indoor units can be individually controlled
  • Available static pressure of 30Pa
  • Comfortable horizontal air discharge ensures draughtfree operation and prevents ceiling soiling
  • Connectable to current Daikin control systems: DS-net, Intelligent Touch Controller, Intelligent Manager, BACnet Gateway, DMS-iF
  • DX shell and tube evaporator – one pass refrigerant side to minimize pressure drops
  • Double refrigeration circuit (from 360kW on)
  • Factory mounted valve (both left and right side)
  • Flexible installation, as the air suction direction can be altered from rear to bottom suction
  • For small freezing capacity, single ZEAS units can be connected to a booster unit
  • Heat exchange, bypass and fresh-up mode available
  • Lightweight units (max. 105kg) can be installed by two people
  • Optimum ESEER values
  • Possibility to shut 1 or 2 flaps for easy installation in corners
  • Removable washable air filter (self-extinguishing class 1)
  • Several operating sound levels down to 101dB
  • Sleeping mode auto control will gradually increase the set temperature to provide a comfortable environment for sleeping.
  • Standard victaulic joints
  • Standard victaulic joints and filter
  • Easy visible drain check thanks to clear drain socket
  • Extended drain pan as standard
  • High external static pressure up to 200Pa facilitates extensive duct and grille network
  • Indoor unit silent operation: "silent" button on the remote control lowers the operation sound of the indoor unit by 3dBA
  • Inverter fans ensure smoother operation and better colour of sound
  • Low operating sound level - extra low noise option available
  • No limit on unused ports allowing phased installation
  • Operation range (inlet water temperature): 10°C to 45°C
  • Possibility to individually restrict each button
  • Possibility to individually restrict menu functions
  • Possibility to limit peak power consumption between 30 and 80%, for example during periods with high power demand
  • Quick cool/heat change over
  • Quiet operation
  • Standard built-in drain pump increases flexibility and installation speed
  • Standard drain pump with 580mm lift increases flexibility and installation speed
  • Standard drain pump with 700mm lift
  • Standard electronic expansion valve
  • The indoor unit and domestic hot water tank can be stacked to save space, or installed next to each other, if only limited height is available
  • Variable Water Flow control option increases flexibility and control
  • Water inlet or outlet temperature control
  • Compact design
  • Compatibility with D-BACS
  • Connectable to all VRV control systems
  • DICN (Daikin Integrated Chiller Network) operation as standard within same series
  • Daikin remote controls give you easy control at your fingertips
  • Easy maintenance: switch box can be reached by simply removing the suction grille
  • Faster installation thanks to open port connection
  • Flexible installation: air suction direction can be altered from rear to bottom suction and choice between free use or connection to optional suction grilles
  • Improved refrigerant containment check
  • In line with RoHS
  • Input contacts/available outputs
  • Linear sound reduction in function of ambient temperature
  • Outdoor unit display for quick on-site settings and easy read out of errors together with the indication of service parameters for checking basic functions.
  • Possibility to individually restrict each operation mode (Cooling, Heating, Auto, etc.)
  • Powerful mode can be selected for rapid cooling; after the powerful mode is turned off, the unit returns to the preset mode.
  • Pre-cool / pre-heat control reduces air conditioning load by not running the HRV shortly after the air conditioning is switched on
  • Refrigerant containment check
  • Several operating sound levels down to 100dB
  • Several operating sound levels down to 102dB
  • Several operating sound levels down to 86dB (extra low noise units)
  • Specially developed heat exchange element with High Efficiency Paper (HEP)
  • Spread your installation cost by phased installation
  • Standard drain pump with 630mm lift increases flexibility and installation speed
  • Standard flow switch
  • Standard integrated: main switch, pressure ports, flow switch, filter, shut-off valves and air purge
  • Titanium apatite photocatalytic air purification filter removes airborne microscopic particles, powerfully decomposes odours and helps to prevent the propagation of bacteria, viruses, microbes to ensure a steady supply of clean air
  • Unified model for heat pump and heat recovery version and geothermal and standard operation
  • When a power failure occurs all settings remain stored thanks to the built-in backup power
  • Wide outdoor unit range: from 25 to 170 kW
  • Wireless remote control up to 9m distance, availability of a wired or simplified controller
  • Allows multi tenant applications
  • 3-D air flow combines vertical and horizontal auto swing to circulate a stream of warm or cool air right to the corners of even large spaces (50,60,71 class only)
  • Connectable to REYQ-T, RQCEQ-P3 and RWEYQ-T8 heat recovery units
  • Connectable to VRV IV heat recovery
  • Evaporating temperature down to -15°C
  • Input: on/off (per circuit), pump/flow switch
  • Input: on/off, pump/flow switch
  • Keep your system in top condition via our i-Net service: 24/7 monitoring for maximum efficiency, extended lifetime, immediate service support thanks to failure prediction and a clear understanding of operability and usage
  • LED indicator gives an indication on the (normal or wrong) operation of the unit
  • Modular design
  • No drain piping needed
  • Optional BMS connection available
  • PID microprocessor control
  • Partial and total heat recovery option available
  • Partial heat recovery available
  • Polyethylene insulation
  • Possibility to add indoor units and increase capacity without changing the refrigerant piping
  • Standard built-in drain pump with 625mm lift increases flexibility and installation speed
  • Standard filter
  • Supply rich mode prevents back-flow of toilet/kitchen odours or moisture inflow by raising the air supply to maintain proper room pressure
  • The ability to control each conditioned zone individually keeps VRV system running costs to an absolute minimum
  • Wide piping flexibility: 30m indoor height difference, maximum piping length: 190m, total piping length: 1,000m
  • 2 analogue input signals allowing external control of ON-OFF, operation mode, error signal, …
  • Can operate in over- and under pressure
  • Exhaust fresh-up prevents the leaking of odours or floating bacteria into other rooms by raising exhaust air to decrease room pressure
  • Hi-esp fans (up to 150Pa) available as option
  • Possibility to extend the operation range in cooling down to -20°C
  • Possibility to spread the various stages of repclacement thanks to the modular design of the VRV system
  • Power factor up to 0.95
  • Small footprint compressor unit (760 x 554 mm) maximizing useable floor space
  • Standard drain pump with 500mm lift increases flexibility and installation speed
  • Standard plenum
  • Nordic kit option to improve the chiller working conditions in heating mode
  • Supports multiple languages: English, Greek, Russian, Turkish, Slovak, Albanian, Polish
  • Free combination of outdoor units to meet installation space or efficiency requirements
  • Low operation sound level
  • Reaches set temperature more quickly
  • Insulated with self-extinguishing class 1 heat insulation
  • Multiple capacity steps
  • Dust prevention keeps the fan in an interlocked indoor unit turning, so dust does not fall from the air filter when the HRV is operating independently
  • Double refrigeration circuit (from 240kW on)
  • Double refrigeration circuit (from 400kW on)
  • Chilled water temperatures down to -10°C on standard unit (parameter in the service menu of the PCO² digital controller must be set by the installer)
  • Optimum comfort guaranteed with automatic air flow adjustment to the required load
  • Output: compressor operation, summary alarm, pump relay contact
  • Power factor over 0.95
  • Setback operation maintains the indoor temperature at your specified comfort level during absence, thus saving energy
  • Compatible with hydraulic module EHMC
  • Total solution for fresh air with Daikin supply of both VAM / VKM and electrical heaters
  • Other features: moisturizing operation mode, breeze cooling air flow, comfort sleep operation, mould shock operation
  • Inverter fans available as option
  • Supports multiple languages: English, Czech, Croatian, Hungarian, Romanian, Slovenian, Bulgarian
  • Nitrogen holding charge
  • Premounted, 5 inch piping for easier field connection
  • Stepless or infinitely variable capacity control from 30 to 100%
  • Substantial cost savings compared to a traditional gas boiler installation
  • Available as heating only by irreversible field setting
  • Possibility to extend the operation range in cooling down to -20°C for technical cooling operation such as server rooms
  • Increased reliability via 2 independent refrigerant circuits
  • Non hermetic filter/dryer
  • Daikin Pcaso controller with user friendly interface
  • The air is comfortably spread up- and downwards thanks to 5 different discharge angles that can be programmed via the remote control
  • Twin independent refrigerant circuits ensure operational back up and unit reliability
  • The use of an integrated inverter control ensures maximum comfort and efficiency.

Benefits

  • Auto-cleaning filter

    Auto-cleaning filter

    The filter automatically cleans itself. Simplicity of upkeep means optimum energy efficiency and maximum comfort without the need for expensive or time-consuming maintenance.

  • Fresh hot water

    Fresh hot water

    The structure of thermal store ensures optimal water hygiene and eliminates the risk of bacteria and legionella. Rest assured that your hot water is fresh and safe.

  • Guaranteed operation down to -20°C

    Guaranteed operation down to -20°C

    Daikin Altherma is suitable for all climates, even withstanding severe winter conditions with an operation range down to -20°C

  • Guaranteed operation down to -25°C

    Guaranteed operation down to -25°C

    Daikin units are suitable for all climates, even withstanding severe winter conditions with an operation range down to -25°C

  • Infrastructure cooling

    Infrastructure cooling

    Remove in a reliable, efficient and flexible way the heat constantly generated by the IT and server equipment to ensure maximum uptime while offering the best return on investment.

  • Swing compressor

    Swing compressor

    Swing type compressors have a unified vane and roller with fewer moving parts producing low vibration and friction, achieve higher reliability and efficiency compared to conventionally rotary compressors

  • Scroll compressor

    Scroll compressor

    Scroll compressors consist of two scrolls, one is fixed while the other orbits eccentrically without rotating. Designed for small and medium capacities, they provide constant reliability and high efficiency throughout its service life

  • Free cooling

    Free cooling

    By exploiting the low external air temperatures to cool the water, free cooling reduces the load on the compressors and decreases considerably the annual operating costs during the cold season.

  • Centrifugal compressor

    Centrifugal compressor

    Centrifugal compressors use an impeller and volute section to convert the velocity energy into pressure energy. Centrifugal compressors are designed with either optional variable speed drives (VFD) for superior part-load performance for single or dual compressor units, or with magnetic bearings and totally oil-free operation

  • 3 area intelligent eye

    3 area intelligent eye

    Air flow is sent to a zone other than where the person is located at that moment. Detection is done in 3 directions: left, front and right. If no people are detected, the unit will automatically switch over to the energy efficient setting.

  • Fire place logic

    Fire place logic

    When installed close to a heating device (e.g. fire place or oven) and the set temperature is reached, the fan keeps on running to have an even temperature throughout the whole house

  • Presence & floor sensor

    Presence & floor sensor

    The presence sensor directs the air away from any person detected in the room, when the air flow control is on. The floor sensor detects the average floor temperature and ensures an even temperature distribution between ceiling and floor.

  • Radiant heat

    Radiant heat

    The front panel of the indoor unit radiates additional heat to add to your comfort on cold days.

  • Screw compressor

    Screw compressor

    Single screw compressors have rotors with male and female gears and are designed for high capacities and performances

  • Individual flap control

    Individual flap control

    Individual flap control via the wired remote controller enables you to easily fix the position of each flap individually, to suit any new room configuration. Optional closure kits are available as well.

  • Multi zoning

    Multi zoning

    Allows up to 6 individual climate zones with one indoor unit

  • Online controller via app

    Online controller via app

    Control your indoor unit from any location via app

  • Practically inaudible

    Practically inaudible

    Practically inaudible: the unit runs so quietly, you will almost forget it is there.

  • Reciprocating compressor

    Reciprocating compressor

    The reciprocating type compressor consist of cylinder, pistons and valves. The compression is accomplished by reciprocating movements of the piston in the cylinder

  • Solar ready

    Solar ready

    Take advantage of solar power. Easily connect your hot water storage to solar collectors on your roof.

  • Energy efficiency

    Energy efficiency

    Energy efficient units: full range A class energy labels.

  • Inverter

    Inverter

    Inverter compressors continuously adjust compressor speed to actual demand. Fewer power-consuming starts and stops result in decreased energy consumption (up to 30%) and more stable temperatures.

  • Econo mode

    Econo mode

    Decreases power consumption so that other appliances that need large power consumption can be used. This function is also energy saving.

  • 2 area intelligent eye

    2 area intelligent eye

    Air flow is sent to a zone other than where the person is located at that moment. If no people are detected, the unit will automatically switch over to the energy efficient setting.

  • Movement sensor

    Movement sensor

    Saves power consumption in unoccupied rooms: when the room is empty, the unit switches to economy mode after 20 minutes and restarts when a person enters the room.

  • Energy saving during standby mode

    Energy saving during standby mode

    Current consumption is reduced by about 80% when operating on standby.

  • Home leave operation

    Home leave operation

    Maintains the indoor temperature at your specified comfort level during absence, thus saving energy

  • Night set mode

    Night set mode

    Saves energy, by preventing overcooling or overheating during night time.

  • Fan only

    Fan only

    The unit can be used as fan, blowing air without heating or cooling.

  • Auto-cleaning filter

    Auto-cleaning filter

    The filter automatically cleans itself once per day. Simplicity of upkeep means optimum energy efficiency and maximum comfort without the need for expensive or time-consuming maintenance.

  • Comfort mode

    Comfort mode

    Guarantees draught free operation by preventing that warm or cold air is directly blown on to the body.

  • Draught prevention

    Draught prevention

    When starting to warm up or when the thermostat is off, the air discharge direction is set horizontally and the fan to low speed, to prevent draught. After warming up, air discharge and fan speed are set as desired.

  • Powerful mode

    Powerful mode

    Can be selected for rapid heating or cooling; after the powerful mode is turned off, the unit returns to the preset mode.

  • Auto cooling-heating changeover

    Auto cooling-heating changeover

    Automatically selects heating or cooling mode to achieve the set temperature.

  • Whisper quiet

    Whisper quiet

    Daikin indoor units are whisper quiet. Also the outdoor units are guaranteed not to disturb the quiet of the neighbourhood.

  • Indoor unit silent operation

    Indoor unit silent operation

    "Silent" button on the remote control lowers the operation sound of the indoor unit by 3dB(A)

  • Outdoor unit silent operation

    Outdoor unit silent operation

    "Silent" button on the remote control lowers the operation sound of the outdoor unit by 3dB(A) to ensure a quiet environment for the neighbourhood.

  • Night quiet mode

    Night quiet mode

    Reduces automatically the operation sound during nighttime of the outdoor unit by 3dB(A) by removing an outdoor unit jumper wire. (Multi outdoor units in cooling mode only).

  • Comfortable sleeping mode

    Comfortable sleeping mode

    Increased comfort function that follows a specific temperature fluctuation rhythm.

  • Double thermostat function

    Double thermostat function

    Controls the temperature via a sensor on the air conditioner or via a sensor on the remote control.

  • Ceiling soiling prevention

    Ceiling soiling prevention

    Prevents air from blowing out too long in horizontal position, to prevent ceiling stains.

  • 3-D air flow

    3-D air flow

    Combines vertical and horizontal auto-swing to circulate a stream of warm or cool air right to the corners of even large spaces.

  • Vertical auto swing

    Vertical auto swing

    Possibility to select automatic vertical moving of the air discharge flaps for efficient air and temperature distribution throughout the room.

  • Horizontal auto swing

    Horizontal auto swing

    Possibility to select automatic horizontal moving of the air discharge louvre, for uniform air flow and temperature distribution.

  • Auto fan speed

    Auto fan speed

    Automatically selects the necessary fan speed to reach or maintain the set temperature.

  • Fan speed steps

    Fan speed steps

    Allows to select up to the given number of fan speed.

  • Ururu - humidification

    Ururu - humidification

    Absorbs moisture from the outdoor air and evenly distributes it throughout the indoor areas.

  • Sarara - dehumidification

    Sarara - dehumidification

    Reduces indoor humidity, without affecting the room temperature, by mixing cool, dry air with warm air.

  • Dry programme

    Dry programme

    Allows humidity levels to be reduced without variations in room temperature.

  • Silver allergen removal and air purifying filter

    Silver allergen removal and air purifying filter

    Captures allergens such as pollen and dust mites. The filter suppresses pollen and mites forr 99% or more.

  • Flash Streamer

    Flash Streamer

    Generates high speed electrons that powerfully break down viruses, bacteria, odours and allergens.

  • Titanium apatite deodorising filter

    Titanium apatite deodorising filter

    Captures airborne dust particles and harmful organic chemical substances such as bacteria, viruses and allergens and deodorizes the odours of e.g. tobacco and pets.

  • Deodorising filter

    Deodorising filter

    Captures airborne dust particles and decomposes odours to ensure a steady supply of clean air.

  • Air purification filter

    Air purification filter

    Removes airborne dust particles and prevents the propagation of bacteria and viruses to ensure a steady supply of clean air.

  • Air filter

    Air filter

    Removes airborne dust particles to ensure a steady supply of clean air.

  • Weekly timer

    Weekly timer

    Can be set to start heating or cooling anytime on a daily or weekly basis.

  • 24 hour timer

    24 hour timer

    Can be set to start operation anytime during a 24 hour period

  • Timer

    Timer

    Can be set to start heating or cooling within a specified period.

  • Infrared remote control

    Infrared remote control

    Starts, stops and regulates the air conditioner from a distance.

  • Wired remote control

    Wired remote control

    Starts, stops and regulates the air conditioner.

  • Centralised control

    Centralised control

    Starts, stops and regulates several air conditioners from one central point.

  • Online controller

    Online controller

    Control your indoor unit from any lcoation via smart phone, laptop, pc, tablet or touch screen

  • Auto-restart

    Auto-restart

    The unit restarts automatically at the original settings after power failure.

  • Self diagnosis

    Self diagnosis

    Simplifies maintenance by indicating system faults or operating anomalies.

  • Multi tenant

    Multi tenant

    The indoor unit's main power supply can be turned off when leaving the hotel or office building.

  • Drain pump kit

    Drain pump kit

    Facilitates condensation draining from the indoor unit.

  • Twin/triple/double twin application

    Twin/triple/double twin application

    2,3 or 4 indoor units can be connected to only a single outdoor unit even if they have different capacities. All indoor units operate within the same heating or cooling mode from one remote control.

  • Multi model application

    Multi model application

    Up to 5 indoor units can be connected to a single outdoor unit, even if they have different capacities. All indoor units can individually be operated within the same heating or cooling mode.

  • VRV for residential application

    VRV for residential application

    Up to 9 indoor units (even different capacities and up to 71 class) can be connected to a single outdoor unit. All indoor units can individually be operated within the same mode.

Technical details

Documentation

Catalogues

Sorry, we could not find any documents in this category.

Installation manuals

Sorry, we could not find any documents in this category.

Installer reference guide

Sorry, we could not find any documents in this category.

Operation manuals

Sorry, we could not find any documents in this category.

Declaration of Conformity

Sorry, we could not find any documents in this category.

User reference guide

Sorry, we could not find any documents in this category.