| EDLQ05CAV3 | EDLQ07CAV3 | ||||
|---|---|---|---|---|---|
| Heating capacity | Nom. | kW | 4.40 (1), 4.03 (2) | 7.00 (1), 6.90 (2) | |
| Power input | Heating | Nom. | kW | 0.880 (1), 1.13 (2) | 1.55 (1), 2.02 (2) |
| COP | 5.00 (1), 3.58 (2) | 4.52 (1), 3.42 (2) | |||
| Dimensions | Unit | Height | Mm | 735 | 735 |
| Width | Mm | 1,090 | 1,090 | ||
| Depth | Mm | 350 | 350 | ||
| Weight | Unit | kg | 76.0 | 80.0 | |
| Sound power level | Heating | Nom. | dBA | 61 | 62 |
| Sound pressure level | Heating | Nom. | dBA | 48 (8) | 49 (8) |
| Refrigerant | Type | R-410A | R-410A | ||
| GWP | 2,088 | 2,088 | |||
| Charge | kg | 1.30 | 1.45 | ||
| Charge | TCO2Eq | 2.714 | 3.027 | ||
| Power supply | Name | V3 | V3 | ||
| Phase | 1~ | 1~ | |||
| Frequency | Hz | 50 | 50 | ||
| Voltage | V | 230 | 230 | ||
| Notes | (1) - Condition 1: cooling Ta 35°C - LWE 18°C (DT = 5°C); heating Ta DB/WB 7°C/6°C - LWC 35°C (DT = 5°C) | (1) - Condition 1: cooling Ta 35°C - LWE 18°C (DT = 5°C); heating Ta DB/WB 7°C/6°C - LWC 35°C (DT = 5°C) | |||
| (2) - Condition 2: cooling Ta 35°C - LWE 7°C ( DT = 5°C); heating Ta DB/WB 7°C/6°C - LWC 45°C ( DT = 5°C ) | (2) - Condition 2: cooling Ta 35°C - LWE 7°C ( DT = 5°C); heating Ta DB/WB 7°C/6°C - LWC 45°C ( DT = 5°C ) | ||||
| (3) - PED unit category: excluded from scope of PED due to article 1, item 3.6 of 97/23/EC | (3) - PED unit category: excluded from scope of PED due to article 1, item 3.6 of 97/23/EC | ||||
| (4) - Lower if back-up heater is installed; In case of no back-up heater, then heat pump operation starts at 10°C | (4) - Lower if back-up heater is installed; In case of no back-up heater, then heat pump operation starts at 10°C | ||||
| (5) - For more details on standard accessories refer to Installation/operation manual | (5) - For more details on standard accessories refer to Installation/operation manual | ||||
| (6) - Operation range domestic hot water (outdoor unit): range increase by support booster heater or backup heater. See separate drawing for operation range. | (6) - Operation range domestic hot water (outdoor unit): range increase by support booster heater or backup heater. See separate drawing for operation range. | ||||
| (7) - > 50°C BSH only, no heatpump operation | (7) - > 50°C BSH only, no heatpump operation | ||||
| (8) - The sound pressure level is measured via a microphone at a certain distance from the unit. It is a relative value depending on the distance and acoustic environment. Refer to sound spectrum drawing for more information. | (8) - The sound pressure level is measured via a microphone at a certain distance from the unit. It is a relative value depending on the distance and acoustic environment. Refer to sound spectrum drawing for more information. | ||||
| (9) - Operation area is extended to lower flow rates only in case the unit operates with heat pump only. (Not in startup, no BUH operation, no defrost operation). | (9) - Operation area is extended to lower flow rates only in case the unit operates with heat pump only. (Not in startup, no BUH operation, no defrost operation). | ||||
| (10) - Including piping + PHE; excluding expansion vessel | (10) - Including piping + PHE; excluding expansion vessel | ||||
| (11) - Daikin Altherma inverter controlled compressor starting current always <= max. running current | (11) - Daikin Altherma inverter controlled compressor starting current always <= max. running current | ||||
| (12) - Minimum Ssc value: Equipment complying with EN/IEC 61000-3-12: European/International Technical Standard setting the limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16A and ≤ 75A per phase | (12) - Minimum Ssc value: Equipment complying with EN/IEC 61000-3-12: European/International Technical Standard setting the limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16A and ≤ 75A per phase | ||||
| (13) - Contains fluorinated greenhouse gases | (13) - Contains fluorinated greenhouse gases | ||||