FHQ-C / RXL-K | Daikin

Product Features

Extended operation range down to -25°C in heating
Ideal for comfortable air flow in wide rooms thanks to Coanda effect: up to 100° discharge angle
Even rooms with ceilings up to 3.8m can be heated up or cooled down very easily without capacity loss
Can easily be mounted in corners and narrow spaces, as it only needs 30mm lateral service space
Energy saving during standby mode: reduces current consumption by about 80% when operating In standby. If no people are detected for more than 20 minutes, the system will automatically switch to the current-saving mode.
Reduced energy consumption thanks to specially developed DC fan motor and drain pump
Outdoor units are fitted with a swing compressor, renowned for its low noise and high energy efficiency
Stylish unit blends easily with any interior. The flaps close entirely when the unit is not operating and there are no air intake grilles visible
Optimised heating solution for your home
Daikin outdoor units are neat, sturdy and can easily be mounted on a roof or terrace or simply placed against an outside wall
No optional adapter needed for DIII-connection, link your unit into the wider building management system.
Outdoor units for pair application
Fresh air intake integrated in the same system thus reducing installation cost as no additional ventilation device is required
Outdoor unit silent operation: "silent" button on the remote control lowers the operation sound of the outdoor unit by 3dBA to ensure a quiet environment for the neighbourhood.

Benefits

Home leave operation

Maintains the indoor temperature at your specified comfort level during absence, thus saving energy
Vertical auto swing

Possibility to select automatic vertical moving of the air discharge flaps for efficient air and temperature distribution throughout the room.
Inverter

Inverter compressors continuously adjust compressor speed to actual demand. Fewer power-consuming starts and stops result in decreased energy consumption (up to 30%) and more stable temperatures.
Energy saving during standby mode

Current consumption is reduced by about 80% when operating on standby.
Fan only

The unit can be used as fan, blowing air without heating or cooling.
Auto cooling-heating changeover

Automatically selects heating or cooling mode to achieve the set temperature.

Outdoor unit silent operation

"Silent" button on the remote control lowers the operation sound of the outdoor unit by 3dB(A) to ensure a quiet environment for the neighbourhood.
Fan speed steps (3 steps)

Allows to select up to the given number of fan speed.
Dry programme

Allows humidity levels to be reduced without variations in room temperature.
Air filter

Removes airborne dust particles to ensure a steady supply of clean air.
Weekly timer

Can be set to start heating or cooling anytime on a daily or weekly basis.
Infrared remote control

Starts, stops and regulates the air conditioner from a distance.
Wired remote control

Starts, stops and regulates the air conditioner.
Centralised control

Starts, stops and regulates several air conditioners from one central point.
Auto-restart

The unit restarts automatically at the original settings after power failure.
Infrastructure cooling

Remove in a reliable, efficient and flexible way the heat constantly generated by the IT and server equipment to ensure maximum uptime while offering the best return on investment.
Self diagnosis

Simplifies maintenance by indicating system faults or operating anomalies.
Twin/triple/double twin application

2,3 or 4 indoor units can be connected to only a single outdoor unit even if they have different capacities. All indoor units operate within the same heating or cooling mode from one remote control.
Multi model application

Up to 5 indoor units can be connected to a single outdoor unit, even if they have different capacities. All indoor units can individually be operated within the same heating or cooling mode.
VRV for residential application

Up to 9 indoor units (even different capacities and up to 71 class) can be connected to a single outdoor unit. All indoor units can individually be operated within the same mode.